Ferrosilicon 75 | FeSi75 Composition & Special Grades
video

Ferrosilicon 75 | FeSi75 Composition & Special Grades

Surface: Block
Packaging: Ton bag packaging
Impurities: 0.01(%)
Size: 0-1mm, 1-3mm, 3-8mm, 8-15mm
Send Inquiry
Product Introduction

Ferrosilicon 75 for Steelmaking and Alloy Production

 

Ferrosilicon 75, commonly written as FeSi75, is a silicon-iron alloy with a silicon content of approximately 75% or higher according to the agreed specification. It is used as a silicon source in steelmaking, foundry and alloy production where both silicon addition and minor-element control need to be considered.

For purchasing, the FeSi75 grade name should not be used as the only acceptance criterion. In addition to Si, you should confirm the maximum Al, C, P and S values required by your process.

Our current reference specification for this Ferrosilicon 75 product is Si ≥75.0%, with separate limits for Al, C, P and S. For applications requiring tighter control of carbon, aluminum or titanium, special Ferrosilicon grades can be discussed separately.

 

Ferrosilicon 75 Chemical Composition

 

The following FeSi75 Chemical Composition is the reference specification currently associated with this product.

Si Al C P S
≥75.0% ≤2.0% ≤0.20% ≤0.04% ≤0.02%

Si defines the main Ferrosilicon grade, while Al, C, P and S are separate control items. If one of these elements is important to your steel or alloy specification, its maximum value should be written directly into the RFQ and purchase specification.

 

Special Ferrosilicon 75 Grades for Tighter Impurity Control

 

Standard FeSi75 is not suitable for every steel grade. Some production routes require tighter limits on individual minor elements, especially carbon, aluminum or titanium.

Low Carbon Ferrosilicon for Carbon-Sensitive Steel Grades

Low carbon and ultra-low carbon Ferrosilicon are selected when additional carbon input from the ferroalloy needs to be restricted. This can be relevant to stainless steel, electrical steel and other processes where carbon control is part of the final chemistry requirement.

Instead of requesting only "low carbon FeSi," we recommend specifying the maximum acceptable C value so the requirement can be confirmed before supply.

Low Aluminum Ferrosilicon for Controlled Al Addition

Low aluminum Ferrosilicon is used when Al introduced with the ferroalloy needs tighter control. This is particularly important when your process specification limits aluminum-related inclusions or requires a lower Al contribution from the deoxidizer or alloy additive.

The required Al maximum should be treated as a measurable purchase condition rather than assumed from the words "low aluminum."

Low Titanium Ferrosilicon for Special Steel Requirements

Low titanium Ferrosilicon is selected when Ti needs to be restricted in the final material. It can be relevant to electrical steel and certain special-steel applications where titanium-related inclusions need tighter control.

If Ti is an acceptance item in your process, include the required maximum value in the RFQ and corresponding inspection requirements.

Customized Ferrosilicon Chemical Composition

Some applications require more than one controlled element. In these cases, Ferrosilicon can be discussed according to a combined requirement for Si, Al, C, Ti, P, S or other specified elements.

A customized grade should therefore be defined from the actual Chemical Composition rather than only from a commercial grade name.

 

How to Specify Ferrosilicon 75 Before Ordering

 

When you request a quotation for Ferrosilicon 75, we recommend sending the complete specification rather than only "FeSi75."

Purchase Item What to Confirm
Ferrosilicon Grade FeSi75 or required minimum Si content
Al / C / P / S Maximum acceptable limits
Special Elements Ti or other controlled elements where required
Particle Size Required lump size or other physical specification
Application Steelmaking, foundry or alloy production
Inspection Required Batch COA or third-party inspection
Commercial Information Quantity, destination, packing and required delivery date

This prevents a quotation for standard FeSi75 from being compared directly with a low-carbon, low-Al or other special grade that follows a different Chemical Composition.

 

Ferrosilicon Customer Visit and Factory Environment

 

For overseas Ferrosilicon orders, specification confirmation often includes discussion of Chemical Composition, Particle Size, testing, packing and export requirements. Customer visits also provide an opportunity to review our factory and supply capability directly.

Overseas Customer Visit

Overseas customer visiting ZhenAn for ferrosilicon cooperation

ZhenAn Factory Environment

ZhenAn ferrosilicon factory environment

 

Ferrosilicon 75 Supply and Batch Quality Control

 

With more than 30 years of experience in metallurgical materials, we integrate production, processing and international supply. We operate two production bases with a total factory and processing area of 30,000 m², supported by a testing laboratory.

Our metallurgical materials business has an annual production capacity of more than 150,000 tons. We also maintain around 5,000 tons of regular ferroalloy stock to support ongoing supply requirements.

Our team includes 200+ professionals and 50+ R&D personnel, and we serve more than 100 countries.

For Ferrosilicon orders, COA, Certificate of Origin, MSDS and export documents can be provided according to the order requirement. SGS, BV or Intertek third-party inspection can also be arranged when required.

For FeSi75 and special low-impurity grades, we focus on confirming the Chemical Composition and Particle Size before shipment so the quotation, purchase specification and Batch COA follow the same acceptance basis.

Need Standard FeSi75 or a Special Ferrosilicon Grade?

Send your required Si, Al, C, P, S or Ti limits together with Particle Size, quantity and application. We can confirm the specification before preparing the quotation.

Confirm Your Specification Email Your Requirement

 

Ferrosilicon 75 FAQ

 

Q1: What is Ferrosilicon 75?
Ferrosilicon 75 is a silicon-iron alloy with a nominal silicon level around 75%. The applicable grade should also define maximum values for minor elements such as Al, C, P and S.

Q2: What Chemical Composition is listed for this FeSi75?
The current reference specification is Si ≥75.0%, Al ≤2.0%, C ≤0.20%, P ≤0.04% and S ≤0.02%.

Q3: What is low carbon Ferrosilicon?
Low carbon Ferrosilicon uses a tighter C limit than the standard grade. It is selected where additional carbon input from the ferroalloy needs to be restricted.

Q4: What is low aluminum Ferrosilicon?
Low aluminum Ferrosilicon uses a tighter Al limit for processes that require reduced aluminum input. The actual Al maximum should be confirmed from your production specification.

Q5: Can Ferrosilicon 75 Chemical Composition be customized?
Special requirements for C, Al, Ti or other controlled elements can be discussed. Send the required limits so feasibility can be confirmed before quotation.

Q6: Can you provide a Batch COA for Ferrosilicon 75?
Yes. COA documentation can be provided according to the agreed order requirement. The controlled elements and acceptance limits should be confirmed before the order is finalized.

Looking for Ferrosilicon 75?

Send your FeSi75 Chemical Composition, Particle Size, quantity and destination. If you need low-carbon, low-Al or low-Ti Ferrosilicon, include the required maximum limits in your inquiry.

Send Your RFQ Ask About a Sample

 

Hot Tags: Ferrosilicon 75 | FeSi75 Composition & Special Grades, China Ferrosilicon 75 | FeSi75 Composition & Special Grades manufacturers, suppliers, factory, ferro silicon pellets, electrical industry and ferro silicon, metal matrix composites with ferro silicon, ferro silicon in polyurethane casting, composite materials with ferro silicon, ferro silicon in glass casting

Send Inquiry

Home

Phone

E-mail

Inquiry