Ferro Vanadium

The following ferro vanadium composition table covers common FeV40, FeV50, FeV60 and FeV80 grades. Final V content, impurity limits, particle size, packing method and export documents should be confirmed according to batch COA and written quotation.

FeV60 Sulfur Reference: FeV60-A S ≤ 0.04%, FeV60-B S ≤ 0.05%.

Specification Note: The above data is for reference. Final V content, Al, P, Si, C, S if required, particle size and documents should be confirmed according to batch COA.

Request Ferro Vanadium COA

Choosing ferro vanadium is not only about price per ton. For steel plants and alloy producers, the more important point is whether the grade provides the required vanadium addition efficiently and keeps impurity levels within the production standard.

For cost comparison, FeV80 may have a higher price per ton, but it can provide more vanadium per unit weight. FeV40 or FeV50 may be more suitable when cost control and general vanadium addition are the main concern. The final choice should be confirmed together with steel grade, recovery rate and COA requirements.

Ferro vanadium is used when vanadium needs to improve steel performance. The main value of ferro vanadium is not ordinary deoxidation, but controlled vanadium addition for better strength, hardness, wear resistance and heat resistance.

• High-strength low-alloy steel: used for strength improvement and grain refinement.
• Tool steel: selected when hardness, wear resistance and performance stability are required.
• Pipeline steel: used when controlled alloying and mechanical performance are important.
• Structural steel: supports better strength and toughness according to steel grade design.
• Special alloy steel: used when vanadium content and impurity limits need stricter control.

Ferro vanadium is commonly supplied in lump form for furnace charging. Particle size should be selected according to charging method, melting requirement and production process.

• Common size: 3-20mm, 10-50mm, 10-80mm, 10-100mm or customized
• Common packing: 25kg, 50kg, 100kg or 250kg steel drums, or 1MT bags
• Export documents: COA, MSDS/SDS, packing list and commercial invoice
• Inspection: third-party inspection can be discussed according to order requirements

Before shipment, packing marks, batch number, net weight, gross weight and COA should be checked together to avoid document mismatch during customs clearance or factory receiving inspection.

For ferro vanadium export orders, COA is one of the most important documents. It should clearly show V content, Al, P, Si, C and other agreed elements. For FeV60 or special order requirements, sulfur limit can also be confirmed before shipment.

When checking a ferro vanadium COA, the key point is whether the actual batch data matches your steelmaking requirement, not only whether the product name is correct. V content affects alloy addition calculation, while Al, P, Si and C may affect steel chemistry control.

To check whether our ferro vanadium matches your standard, you can send your target steel grade, required V addition, particle size, quantity and destination port. We can help confirm suitable FeV grade, available COA, packing method and current quotation.

Request COA and Grade Recommendation

ZhenAn supports ferro vanadium export orders with grade confirmation, COA review, packing discussion and shipment document preparation. Instead of describing ferro vanadium as a high-purity metal, we focus on practical procurement points such as V content range, impurity limits, particle size and batch consistency.

• Grade coverage: FeV40, FeV50, FeV60 and FeV80 can be confirmed according to order requirements.
• Vanadium content range: 38%-82%, depending on grade and batch COA.
• Steelmaking focus: suitable for alloy steel, tool steel, high-strength steel and special steel applications.
• Export support: COA, MSDS/SDS, packing list and commercial invoice can be provided for shipment.

Customer Visit

Office Environment 

ZhenAn Employees

Ferro vanadium price is affected by grade, V content, impurity limits, particle size, order quantity, packing method, delivery terms and current vanadium market conditions. When comparing offers, it is better to compare both price per ton and price per vanadium unit.

To confirm quotation, please provide required grade, target V content, particle size, quantity, packing requirement and destination port. Please also tell us whether you need COA review, third-party inspection or specific shipment documents.

Please send your requirement to marketing@zanewmetal.com. We will confirm suitable specification, available COA, packing details and quotation according to your order.

Get Ferro Vanadium Specification and Price

Q1: What ferro vanadium grades can you supply?

A: Common grades include FeV40, FeV50, FeV60 and FeV80. Final V content, impurity limits, particle size and packing should be confirmed according to order requirements and batch COA.

Q2: What is the difference between FeV50 and FeV80?

A: FeV50 is a common balanced grade for general alloy steel production. FeV80 has higher vanadium density and is selected when higher vanadium addition efficiency or stricter chemistry control is required.

Q3: How should I compare ferro vanadium prices?

A: Ferro vanadium should not be compared only by price per ton. Because different grades have different V content, price per vanadium unit is also important when comparing FeV40, FeV50, FeV60 and FeV80.

Q4: What size of ferro vanadium is available?

A: Common sizes include 3-20mm, 10-50mm, 10-80mm and 10-100mm. Customized size can be confirmed according to furnace charging and handling requirements.

Q5: Can you provide COA for ferro vanadium?

A: Yes. COA can be provided to confirm V content, Al, P, Si, C and other agreed parameters. Packing list, commercial invoice and MSDS/SDS can also be provided for export orders.

Q6: What information is needed before quotation?

A: Please provide required grade, target V content, particle size, quantity, packing requirement and destination port. COA or third-party inspection requirements should also be confirmed before quotation.

Hot Tags: ferro vanadium, China ferro vanadium manufacturers, suppliers, factory, ferrovanadium trader, ferrovanadium event, ferrovanadium analysis report, ferrovanadium enhancement, ferrovanadium assurance, Ferrovanadium Dark