Pure Magnesium Metal Powder 99.8%
video

Pure Magnesium Metal Powder 99.8%

Melting point: Decomposes above 350°C (662°F)
Solubility: Insoluble in water
Grade: Industrial grade
Packaging: 25kg/bag
Send Inquiry
Product Introduction

Metallurgical Magnesium Powder

 

Quick Answer: Metallurgical magnesium powder is a metallic magnesium material used where controlled Mg addition is required, especially for hot-metal desulfurization and other metallurgical treatment processes. The current product reference contains approximately 99% Mg with controlled metallic and non-metallic impurities.

For purchasing, confirm the Mg content, impurity limits, particle-size distribution, quantity, packing and feeding method before quotation.

Metallurgical magnesium powder is produced from metallic magnesium and processed into a controlled powder form for industrial use. Its high chemical activity makes it suitable for metallurgical treatment where magnesium is required as a reactive addition material.

One of the main applications is desulfurization, because magnesium has a strong affinity for sulfur. The actual amount required depends on the initial sulfur level, target sulfur content, feeding method and magnesium recovery in the process.

For another available magnesium powder product, see our magnesium metal powder page.

Metallurgical Magnesium Powder Applications

 

Hot Metal Desulfurization

Magnesium powder can be injected or added during metallurgical treatment to reduce sulfur content. The dosage should be calculated from the actual sulfur-removal requirement and process recovery rather than using one fixed addition rate for every heat.

Foundry and Metal Treatment

Magnesium-bearing materials can also be used in suitable foundry and metal-treatment processes where controlled Mg addition is required. The exact specification should match the melt chemistry and treatment method.

Metallurgical Reduction

Metallic magnesium can act as a reducing material in selected metallurgical production routes. The required Mg content and impurity limits depend on the downstream process.

Magnesium Powder Chemical Composition

 

The following values are based on the current product-page reference. Final acceptance should follow the agreed purchase specification and batch inspection result.

Element Reference Value Element Reference Value
Mg 99% O 0.8 wt%
Al 0.028 (unit to be confirmed) Si 0.035%
Fe 0.022% Mn 0.08%
Ca 0.01% Na 0.028%
Ni 0.02% Co 0.019%
Cu 0.08% Pb 0.001%
K 0.01% N 0.022%
C 0.055% S 0.029%

Specification note: The Al value in the original product data is shown as 0.028 without a unit. Please confirm the original COA before publishing it as a percentage. Final chemistry should follow the actual batch inspection result.

What to Check in Magnesium Powder Chemistry

 

Mg content alone is not enough to define a metallurgical magnesium powder. For stable purchasing, the impurity profile should also be checked against the downstream process.

Check Item Why It Matters
Mg Content Determines the amount of active magnesium supplied
Fe / Si / Al Should match the impurity limits required by the metallurgical process
C / S / O May be important where downstream chemistry is tightly controlled
Particle Size Affects powder feeding, reaction behavior and handling
Batch COA Confirms the actual chemistry of the supplied material

Magnesium Powder for Steel Desulfurization

 

For desulfurization, the required Mg input depends on the amount of sulfur that must be removed and the actual magnesium recovery during treatment.

Required Mg Addition Depends on Initial Sulfur, Target Sulfur and Process Recovery

Use plant production data to determine the final magnesium dosage and feeding rate.

If magnesium powder is used through an injection system, powder flowability and particle-size distribution should also be confirmed because they influence feeding stability.

Magnesium Powder Particle Size

 

Particle size affects powder flow, reaction rate, feeding behavior and material loss. The required mesh or particle-size distribution should therefore match the injection or feeding equipment used in production.

When comparing quotations, make sure the Mg content and particle-size specification are the same. Two materials with different mesh distributions should not be compared only by price per ton.

What to Check Before Buying Magnesium Powder

 

Purchase Item What to Confirm
Mg Content Required minimum Mg percentage
Impurity Limits Fe, Si, Al, C, S, O and other required elements
Particle Size Required mesh or particle-size distribution
Application Desulfurization or other metallurgical treatment
Quantity Required order volume
Packing Required sealed industrial packing
Inspection Required chemistry and particle-size checks
COA Batch chemistry confirmation

Storage and Handling

 

Magnesium powder is a reactive metallic powder and should be stored and handled according to the applicable SDS and workplace procedures.

The material should be protected from moisture, contamination and inappropriate ignition sources. Packing should remain closed and intact until the material is ready for industrial use.

Transport and storage requirements should be confirmed according to the final particle-size specification, packing method and applicable shipping documentation.

Magnesium Powder Quality Control

 

For repeat orders, quality control should cover both chemical composition and powder characteristics.

  • Mg content inspection
  • Agreed impurity testing
  • Particle-size distribution
  • Powder appearance
  • Packing condition
  • Batch identification
  • COA or agreed inspection record

Magnesium Powder Supply

 

We can confirm the required magnesium content, impurity limits, particle-size specification and packing before shipment.

metallurgical magnesium metal powder

Metallurgical magnesium metal powder

Magnesium Powder Production and Inspection

 

magnesium metal powder production and inspection

Magnesium powder production and quality inspection

What to Send for a Magnesium Powder Quote

 

To prepare the correct product specification and quotation, please send:

  • Required Mg content
  • Impurity limits
  • Particle-size range or mesh
  • Quantity
  • Packing requirements
  • Metallurgical application
  • Incoterm and destination port

Request a Metallurgical Magnesium Powder Quote

Send us your required Mg content, impurity limits, particle-size range, quantity, packing and metallurgical application. If you have a technical specification or target COA, include it with your inquiry.

Email: marketing@zanewmetal.com

Request a Quote

Metallurgical Magnesium Powder FAQ

 

Q: What is the Mg content of this magnesium powder?

A: The current product reference lists approximately 99% Mg. Final batch chemistry should be confirmed according to the agreed specification and inspection result.

Q: What is metallurgical magnesium powder mainly used for?

A: One of its main applications is metallurgical desulfurization. It can also be used in other processes requiring controlled metallic magnesium addition.

Q: Why is particle size important?

A: Particle-size distribution affects powder feeding, flow behavior, reaction rate and handling. The required range should match the industrial feeding or injection process.

Q: What impurities are listed in the current specification?

A: The current reference includes Al, Fe, Ca, Ni, Cu, Mn, Na, Co, Si, Pb, K, N, C, S and O in addition to Mg.

Q: Can I request specific impurity limits?

A: Yes. Please provide the required Mg content and maximum impurity limits before quotation so the suitable batch or production specification can be confirmed.

Q: What information should I send for a quotation?

A: Send the required Mg content, impurity limits, particle-size range, quantity, packing, application, Incoterm and destination port.

Hot Tags: pure magnesium metal powder 99.8%, China pure magnesium metal powder 99.8% manufacturers, suppliers, factory, metal magnesium powder 99 8 , magnesium metal powder 99.8% price, buy magnesium metal 99.8%, pure magnesium ingot 99 99 , magnesium alloy metal 99 8 , magnesium metal powder 99 8 for sale

Send Inquiry

Home

Phone

E-mail

Inquiry