Pure Nickel Strip | Nickel 200, 201, N4 & N6 Strip
Product Name: Pure Nickel Strip
Available Grades: Nickel 200, Nickel 201, N4, N6 and other agreed pure nickel grades
Product Feature: High-purity nickel strip with custom thickness, width and supply forms
Supply Form: Roll, coil, straight strip or pre-cut tabs
Quality Support: Batch COA/MTC available for grade and chemical composition verification
Inquiry Info: Please send grade, thickness, width, tolerance, quantity and destination port for quotation
Pure Nickel Strip in Nickel 200, Nickel 201, N4 and N6 Grades
Pure nickel strip is flat nickel material supplied in Nickel 200, Nickel 201, N4, N6 and other agreed pure nickel grades. It is selected where nickel purity, corrosion resistance, electrical performance, formability and controlled strip dimensions are important.
ZhenAn supplies pure nickel strip in rolls, coils, straight strips and custom cut parts. Thickness, width, tolerance, temper, surface condition and edge condition can be confirmed according to your drawing or written specification. Batch COA/MTC is available for grade and chemical composition verification before shipment.
| Item | Product Specification |
|---|---|
| Product Name | Pure Nickel Strip |
| Available Grades | Nickel 200, Nickel 201, N4, N6 and other agreed pure nickel grades |
| Nickel Purity | Nickel 200 / 201: Ni + Co ≥99.0%; N4: Ni + Co ≥99.9% reference; N6: Ni + Co ≥99.6% based on available COA |
| Thickness | Custom according to order specification and processing requirement |
| Width | Custom narrow strip or wider coil according to drawing and slitting requirement |
| Dimensional Tolerance | Thickness and width tolerance confirmed according to final product specification |
| Supply Form | Roll, coil, straight strip, cut-to-length strip or custom cut parts |
| Delivery Condition | Soft / annealed, half-hard or hard according to grade and processing requirement |
| Surface Condition | Clean, smooth or bright surface; other agreed finish according to specification |
| Edge Condition | Slit edge or agreed finished edge according to downstream processing requirement |
| Custom Processing | Slitting, cut-to-length and custom strip dimensions according to drawing or sample |
| Quality Documents | COA, MTC, packing list, commercial invoice and MSDS/SDS when required |
| Packing | Roll / coil protection, moisture-resistant packing, carton, pallet or wooden case |
| Quotation Basis | Grade, thickness, width, tolerance, temper, quantity, supply form and destination port |
Pure Nickel Strip Grades and Chemical Composition
Pure nickel strip can be produced from different nickel grades. Nickel 200 and Nickel 201 use UNS grade designations, while N4 and N6 belong to the Chinese pure nickel grade system. These grades should not be treated as direct equivalents based only on nickel content because carbon and other impurity limits are different.
| Grade | Ni + Co | C | Fe | Cu | Mn | Si | Mg |
|---|---|---|---|---|---|---|---|
| Nickel 200 / UNS N02200 | ≥99.0% | ≤0.15% | ≤0.40% | ≤0.25% | ≤0.35% | ≤0.35% | - |
| Nickel 201 / UNS N02201 | ≥99.0% | ≤0.02% | ≤0.40% | ≤0.25% | ≤0.35% | ≤0.35% | - |
| N4 | ≥99.9% | ≤0.01% | ≤0.04% | ≤0.015% | ≤0.002% | ≤0.03% | ≤0.01% |
| N6 | ≥99.6% | ≤0.10% | ≤0.10% | ≤0.05% | ≤0.05% | ≤0.10% | ≤0.10% |
Grade Note: Nickel 201 is the low-carbon version of Nickel 200. N4 provides higher nickel purity under the Chinese pure nickel grade system. The N6 values above are based on an available material COA. Final chemical composition for each strip order should follow the applicable specification and batch COA/MTC.
| Selection Requirement | Grade Direction |
|---|---|
| General commercially pure nickel strip | Nickel 200 |
| Lower-carbon pure nickel requirement | Nickel 201 |
| Higher-purity Chinese pure nickel grade | N4 |
| Chinese pure nickel strip with batch COA confirmation | N6 |
For application-specific products, see our Ni200 Nickel Strip for Electroplating and Ni201 Pure Nickel Strip for Batteries.
Pure Nickel Strip Dimensions and Custom Processing
Thickness, width and tolerance are key purchasing parameters for pure nickel strip because they affect forming, stamping, slitting, welding and electrical performance. For custom industrial strip, dimensions should be specified together with temper, surface and edge requirements rather than treated as isolated values.
| Specification | Available Option |
|---|---|
| Thickness | Custom according to drawing or written specification |
| Width | Custom narrow strip or wider coil according to slitting requirement |
| Thickness Tolerance | Confirmed according to nominal thickness and production requirement |
| Width Tolerance | Confirmed according to strip width and edge requirement |
| Roll / Coil | Continuous strip for slitting, stamping, automatic processing or further fabrication |
| Straight / Cut-to-Length Strip | Available according to required length, drawing and order quantity |
| Edge Condition | Slit edge or agreed finished edge |
| Custom Processing | Slitting, cut-to-length and custom dimensions according to sample or drawing |
The inspection photo below shows dimensional checking of a pure nickel strip sample at approximately 0.20mm thickness and 30mm width. Actual production dimensions and tolerances should follow the confirmed order specification.
Pure Nickel Strip Surface, Temper and Edge Options
Temper, surface finish and edge condition should be specified together with thickness and width because they affect forming, stamping, electrical contact quality and downstream fabrication.
| Strip Requirement | Available Option | Why It Matters |
|---|---|---|
| Temper / Delivery Condition | Soft / annealed, half-hard or hard | Influences formability, springback and mechanical handling during stamping or fabrication. |
| Surface Condition | Clean, smooth, bright or agreed finish | Important for electrical contacts, precision parts and applications where contamination or surface damage must be controlled. |
| Edge Condition | Slit edge or agreed finished edge | Edge quality should be confirmed when the strip will be stamped, formed, welded or assembled into narrow components. |
The required temper, surface and edge condition should be included in the drawing or purchase specification before quotation when these characteristics are critical to downstream processing.
Pure Nickel Strip Applications
Electrical Contacts and Conductive Components
Pure nickel strip can be stamped, bent or cut into electrical contacts, connector parts, conductive tabs and other components where nickel-based corrosion resistance, electrical performance and dimensional consistency are required.
Chemical and Industrial Components
Nickel 200, Nickel 201, N4 and N6 strip may be considered for selected alkaline, chemical and industrial components. For chloride-bearing, sulfur-containing, acidic or strongly oxidizing service, confirm whether pure nickel or a nickel alloy is more suitable before ordering.
Electroplating and Nickel Anode Applications
Nickel 200 strip can be supplied for selected electroplating and nickel anode applications where commercially pure nickel composition, controlled dimensions and suitable surface condition are required. For this application, see our Ni200 Nickel Strip for Electroplating.
Battery Tabs and Connectors
Pure nickel strip can also be used for battery tabs, conductive links and spot-welded connector parts. Nickel 201 is available when a low-carbon pure nickel grade is required. Battery-specific thickness, width and supply-form selection are covered in our Ni201 Pure Nickel Strip for Batteries page.
Pure Nickel Strip vs Nickel-Plated Steel Strip
Pure nickel strip and nickel-plated steel strip can look similar, but they use different base materials. If your drawing or application requires pure nickel, material confirmation should be based on grade, chemical composition and batch documentation rather than surface appearance alone.
| Item | Pure Nickel Strip | Nickel-Plated Steel Strip |
|---|---|---|
| Base Material | Nickel-based material through the strip thickness | Steel substrate with nickel surface coating |
| Material Verification | Grade, chemical composition and COA/MTC | Base steel and coating specification |
| Corrosion Behavior | Based on the nickel material itself | Depends on coating integrity and steel substrate |
| Typical Selection | Applications requiring pure nickel material | Cost-sensitive applications where plated steel is acceptable |
Pure Nickel Strip Inspection and Quality Control
| Inspection Item | What We Check |
|---|---|
| Dimensions | Thickness, width and agreed dimensional tolerance |
| Material Grade | Nickel grade and chemical composition against the applicable specification and batch COA/MTC |
| Surface | Cleanliness, visible scratches, contamination and obvious handling damage |
| Edge Condition | Slitting quality and agreed edge requirement |
| Batch Identification | Grade, size, batch number and net weight before packing |
For custom strip orders, inspection points should be confirmed together with the drawing or written specification. This helps avoid differences in tolerance, temper, edge condition or surface expectation during receiving inspection.
Pure Nickel Strip Packing and Quality Documents
Pure nickel strip should be protected from edge damage, deformation, moisture and surface contamination during storage and international shipment. Packing is selected according to strip dimensions, roll weight, order quantity and transport conditions.
| Supply Support | Available Option |
|---|---|
| Roll / Coil Protection | Protective wrapping, moisture-resistant packing or agreed inner protection |
| Outer Packing | Carton, pallet or wooden case according to shipment requirements |
| Batch Identification | Grade, size, batch number and net weight can be marked for receiving inspection |
| Quality Documents | COA, MTC, packing list and MSDS/SDS when required |
| Third-Party Inspection | SGS, BV or TÜV inspection can be arranged according to order requirements |
Pure Nickel Strip Quotation and ZhenAn Supply Support
For an accurate pure nickel strip quotation, please provide the required grade, thickness, width, tolerance, temper, supply form, quantity and destination. A drawing or sample is especially useful for custom slitting, edge requirements or cut-to-length processing.
| Inquiry Item | Information Required |
|---|---|
| Nickel Grade | Nickel 200, Nickel 201, N4, N6 or required pure nickel grade |
| Thickness | Required thickness and thickness tolerance |
| Width | Required width and width tolerance |
| Temper / Surface | Soft, annealed, half-hard, hard or required surface condition |
| Edge / Processing | Slit edge, agreed finished edge, cut-to-length or other custom processing requirement |
| Supply Form | Roll, coil, straight strip or custom cut parts |
| Quantity | Required KG, rolls, coils or pieces |
| Documents | COA, MTC, MSDS/SDS or third-party inspection when required |
| Destination | Destination port or country |
ZhenAn Supply Advantages
Nickel 200, Nickel 201, N4, N6 and other agreed pure nickel grades are available according to the required specification.
Thickness, width, slitting, edge condition and cut-to-length requirements can be confirmed against your drawing or sample.
COA/MTC, packing list and other export documents can be provided according to order requirements.
SGS, BV or TÜV inspection can be arranged when required, with roll/coil protection, pallet or wooden-case packing for export shipment.
FAQ About Pure Nickel Strip
Q: What Grades Are Available for Pure Nickel Strip?
A: Pure nickel strip can be supplied in Nickel 200, Nickel 201, N4, N6 and other agreed pure nickel grades. These grade systems have different chemical composition and impurity limits, so the final material should be confirmed against the applicable specification and batch COA/MTC.
Q: What Is the Difference Between Nickel 200 and Nickel 201 Strip?
A: Nickel 200 and Nickel 201 are commercially pure nickel grades. Nickel 201 has a lower carbon limit, typically 0.02% maximum compared with 0.15% maximum for Nickel 200. Grade selection should consider composition, service temperature, corrosion environment and processing requirements.
Q: Can Pure Nickel Strip Thickness and Width Be Customized?
A: Yes. Pure nickel strip can be supplied in custom thicknesses and widths according to the drawing, processing method and order quantity. Thickness tolerance, width tolerance, temper and edge condition should be included when dimensional consistency is important.
Q: What Supply Forms Are Available for Pure Nickel Strip?
A: Pure nickel strip can be supplied as rolls, coils, straight strips or custom cut-to-length parts. Slitting and custom strip dimensions can also be discussed according to your drawing or sample.
Q: What Temper and Surface Options Are Available?
A: Pure nickel strip can be supplied in soft / annealed, half-hard or hard condition according to grade and processing requirement. Surface requirements may include clean, smooth or bright strip, with the final condition confirmed in the written specification.
Q: Is Pure Nickel Strip the Same as Nickel-Plated Steel Strip?
A: No. Pure nickel strip uses nickel as the base material through the strip thickness, while nickel-plated steel uses a steel substrate with a nickel coating. If pure nickel is required, verify the grade, chemical composition and batch documentation rather than relying only on surface appearance.
Q: What Applications Use Pure Nickel Strip?
A: Pure nickel strip is used for electrical contacts, conductive components, selected chemical and industrial parts, electroplating applications and battery tabs or connectors. The suitable grade, thickness, temper and surface depend on the specific application and processing method.
Q: Can You Provide COA or MTC for Pure Nickel Strip?
A: Yes. Batch COA or MTC can be provided according to order requirements for verification of nickel grade, chemical composition and batch information. Third-party inspection can also be arranged when required.
Hot Tags: pure nickel strip | nickel 200, 201, n4 & n6 strip, China pure nickel strip | nickel 200, 201, n4 & n6 strip manufacturers, suppliers, factory
Previous
No InformationYou Might Also Like
Send Inquiry