Ti Alloy Mig Wire

 

By using induction heating to perform rapid recrystallization annealing on the drawn finished wire, a titanium wire with a recrystallized grain structure that meets the requirements can be obtained. It is suitable for rapid recrystallization annealing of titanium wire with feeding diameter or cross-section thickness ≤4mm.

 

99.9% Titanium straight Wire supplier

 

It is characterized by: divided into two methods: online annealing and separate annealing, suitable for rapid recrystallization annealing of titanium wire with a feeding diameter or cross-sectional thickness ≤ 4mm; for hot-drawn wire, at the end of the hot drawing, the original wire drawing machine is used As the wire continues to advance, the wire is recrystallized and annealed online in the induction heating device. The induction heating only performs rapid heating heat compensation of 0.3 to 0.5 seconds at about 100 to 250°C to reach the blank process temperature and obtain recrystallization. Grain structure.

 

Pure ti alloy wire supplier

 

 

 

Diameter	Length
titanium wire	0.1 mm -3.0 mm	100 mm-1000 mm
titanium bar	3.0 mm- 500 mm	100 mm - 3000 mm

 

 

 

99.9% Titanium Wire supplier

 

99.9% ti wire supplier supplier

 

 

 

Tel: +86-372-5055135 + 8615896822096

Fax: +86-372-5055135

Email: sale@zaferroalloy.com

Whatsapp: + 8615896822096

Skype: 8615896822096

Address: 25th Floor, Huafu Commercial Center, Wenfeng District, Anyang City,Henan Province

Hot Tags: ti alloy mig wire, China ti alloy mig wire manufacturers, suppliers, factory, ferro silicon briquettes, calcium aluminum cored wire, coatings for tungsten alloy crucible, Niobium Coil Sheet, mo round bar, crucible liner tungsten company