Cast Ferrosilicon
video

Cast Ferrosilicon

Brand Name:ZhenAn
Product Name: Ferro Silicon
Product Size:customized
Payment method: T/T, L/C, letter of credit, etc.
Purity: high purity
Send Inquiry
Product Introduction

Ferrosilicon Production Process and Supply

 

Quick Answer: Ferrosilicon is produced by carbothermic reduction of silica in a submerged arc furnace using silica-based raw materials, carbon reductants and an iron source. After smelting, the alloy is tapped, cooled, crushed, screened and inspected according to the required grade and particle size.

For purchasing, the important factors are not only the FeSi grade, but also silicon content, impurity limits, particle size, fines control, packing and batch consistency.

Ferrosilicon is an iron-silicon alloy widely used as a silicon source in steelmaking, foundry production and other metallurgical processes. Different grades are produced and processed according to the required silicon content and impurity limits.

For high-silicon grades and available size options, see our High Purity Ferrosilicon product page.

Raw Materials Used in Ferrosilicon Production

 

Ferrosilicon production requires several groups of raw materials. Their quality and proportion influence silicon recovery, impurity levels, furnace operation and final product consistency.

Raw Material Function
Quartz / Silica Provides the silicon source for ferrosilicon production
Carbon Reductants Provide carbon for the high-temperature reduction of silica
Iron-Bearing Material Provides the iron component of the final FeSi alloy
Charge-Conditioning Materials May be used according to furnace operation and production requirements

Silica purity, reductant quality and iron-source composition should be controlled because variations in the furnace charge can affect both silicon yield and the impurity profile of the final alloy.

For a more detailed explanation, see our guide to ferrosilicon raw materials .

Detailed Ferrosilicon Production Process

 

1. Raw Material Preparation and Batching

Quartz or another suitable silica source, carbon reductants and iron-bearing materials are prepared according to the required furnace charge. Particle size, moisture and raw-material consistency should be controlled before charging.

2. Furnace Charging

The prepared raw materials are charged into a submerged arc furnace. A stable charge distribution helps maintain furnace permeability and consistent reaction conditions.

3. High-Temperature Reduction and Smelting

Inside the furnace, silica is reduced by carbon at high temperature while iron participates in the formation of the iron-silicon alloy. Furnace operation, raw-material quality and electrical conditions affect silicon recovery and final composition.

4. Tapping and Casting

The molten ferrosilicon is tapped from the furnace and transferred for casting. The alloy is then allowed to cool and solidify before further processing.

5. Crushing and Screening

After cooling, the solidified ferrosilicon is crushed and screened into the required size range. Common commercial forms include lumps, granules and powder.

6. Inspection and Packing

The finished material is checked according to the agreed chemistry and particle-size specification before packing. Batch chemistry can be confirmed through the corresponding inspection record or COA.

Ferrosilicon Grade Specifications

 

FeSi72 and FeSi75 are commonly supplied high-silicon grades. The table below shows the current product reference for these two grades.

Grade Si ≥ Al ≤ Ca ≤ Mn ≤ Cr ≤ P ≤ S ≤ C ≤
FeSi75 75% 1.5% 1.0% 0.5% 0.5% 0.04% 0.02% 0.2%
FeSi72 72% 2.0% 1.0% 0.5% 0.5% 0.04% 0.02% 0.2%

Specification note: Final chemistry should follow the agreed purchase specification and actual shipment batch COA. If your production requires tighter impurity limits, include them with your inquiry.

How FeSi Grade Affects Alloy Addition

 

The silicon content determines how much theoretical silicon is supplied by each kilogram of ferrosilicon. For the same required silicon input, a higher-silicon grade generally requires a smaller alloy mass, assuming similar process recovery.

Required FeSi Mass ≈ Required Recovered Si ÷ (Actual Si Fraction × Si Recovery)

Use the actual batch silicon content and your own process recovery when calculating the final addition.

Grade selection should therefore consider silicon content together with recovery, impurity limits, particle size and total cost in use.

Ferrosilicon Particle Size and Product Form

 

After crushing and screening, ferrosilicon can be supplied in different particle-size ranges according to the charging or treatment process.

Common Lump Size 10–50 mm / 10–100 mm
Smaller Size Available according to process requirements
Powder Available according to the required mesh range
Shape Lump / Grain / Powder / Other agreed form
Fines Control Can be specified when required by the purchasing specification

Particle size affects material handling, charging, dissolution behavior and dust loss. The correct size should be selected according to your furnace or foundry addition method rather than treating all FeSi sizes as interchangeable.

Main Ferrosilicon Applications

 

Steelmaking

Ferrosilicon is commonly used as a deoxidizing and silicon-alloying material in steel production. The required grade and dosage depend on the starting steel chemistry and target silicon level.

Cast Iron and Foundry

Ferrosilicon is also used in cast iron production for silicon adjustment. Specialized FeSi-based inoculants can additionally be used to influence graphite nucleation and solidification.

For foundry applications, see our Ferrosilicon Inoculant guide .

Ferrosilicon Packing Options

 

Ferrosilicon packing should protect the material during storage, loading and transport and should match the required handling method.

Standard Bulk Packing 1000 kg big bag
Small Packing Can be discussed according to order requirements
Custom Packing Available according to agreed purchase requirements

Ferrosilicon Quality Control

 

Consistent ferrosilicon performance depends on both chemistry and physical form. For purchasing, we recommend checking the complete batch specification rather than only the commercial grade name.

  • Actual silicon content
  • Agreed impurity limits
  • Particle-size distribution
  • Fines and oversize when specified
  • Batch consistency
  • Packing condition
  • Batch COA or agreed inspection record

Customer Visit and Ferrosilicon Supply

 

We support ferrosilicon supply for steelmaking, foundry and other metallurgical applications. Product chemistry, particle size, packing and inspection requirements can be confirmed according to your purchasing specification.

customer visit for ferrosilicon supply

Customer visit and ferrosilicon supply discussion

Ferrosilicon Production and Storage

 

ferrosilicon production and factory environment

Ferrosilicon production and storage

Ferrosilicon Packing

 

ferrosilicon lumps packing

Ferrosilicon lumps packing

What to Confirm Before Ordering Ferrosilicon

 

Purchase Item What to Provide
Grade FeSi75, FeSi72 or required silicon range
Chemistry Required Si and impurity limits
Particle Size For example 10–50 mm or 10–100 mm
Quantity Required metric tons
Packing Required packing format
Application Steelmaking, foundry or other metallurgical use
Delivery Incoterm and destination port

Request a Ferrosilicon Quote

Send us your required FeSi grade, chemical composition, particle size, quantity, packing and application. If you have a target specification or COA requirement, include it with your inquiry so we can confirm the correct material.

Email: marketing@zanewmetal.com

Request a Quote

Ferrosilicon Production FAQ

 

Q: What raw materials are used to produce ferrosilicon?

A: The main raw-material groups are a silica source such as quartz, carbon reductants and iron-bearing materials. Their quality and proportion affect furnace operation and final alloy chemistry.

Q: What type of furnace is used to make ferrosilicon?

A: Ferrosilicon is commonly produced in a submerged arc furnace through high-temperature carbothermic reduction of silica in the presence of iron.

Q: What happens after ferrosilicon is smelted?

A: The molten alloy is tapped, cast and cooled. It is then crushed, screened into the required particle size, inspected and packed for shipment.

Q: What is the difference between FeSi72 and FeSi75?

A: The main difference is silicon content. FeSi75 supplies more silicon per kilogram than FeSi72, so the required alloy addition can differ for the same target silicon input.

Q: What particle sizes of ferrosilicon are available?

A: Common lump sizes include 10–50 mm and 10–100 mm. Smaller particles and powder can also be discussed according to the application and purchase specification.

Q: What should I check when buying ferrosilicon?

A: Confirm the FeSi grade, actual silicon content, impurity limits, particle size, fines requirements, packing and batch COA before ordering.

Q: What information should I send for a ferrosilicon quotation?

A: Send the required grade, chemistry, particle size, quantity, packing, application, Incoterm and destination port.

Hot Tags: cast ferrosilicon, China cast ferrosilicon manufacturers, suppliers, factory, international ferro silicon market, ferro silicon for casting, shipment of ferro silicon, transport of ferro silicon, ferro silicon pellets, polyurethane casting with ferro silicon

Send Inquiry

Home

Phone

E-mail

Inquiry