High Silicon Ferro Titanium
video

High Silicon Ferro Titanium

Use: Steelmaking, Casting
Minimum order quantity: 1 ton
Packaging: Gunny bag packaging
Color: Silver
Appearance: Clean
Send Inquiry
Product Introduction

FeTi70 Ferrotitanium Alloy

 

Quick Answer: FeTi70 is a high-titanium ferrotitanium alloy containing approximately 65–75% Ti. It is mainly used in steelmaking as a titanium alloy addition where controlled Ti input and impurity limits are required.

Available forms include lumps and powder. Final grade, chemistry, particle size and packing should be confirmed according to your steel specification and batch requirements.

Ferrotitanium is an iron-titanium ferroalloy used to introduce titanium into steel and other metallurgical melts. Titanium has a strong affinity for elements such as carbon, nitrogen and oxygen, so FeTi is selected where controlled titanium addition is required during steel refining and alloy production.

For the full available grade range, see our ferrotitanium product range .

What Is FeTi70 Used For?

 

FeTi70 is selected when a relatively high titanium concentration is required with a smaller ferroalloy addition compared with lower-Ti grades.

  • Titanium alloying in steelmaking
  • Control of carbon and nitrogen through titanium-bearing treatment
  • Grain refinement in suitable steel grades
  • Production of titanium-containing specialty steels
  • Metallurgical alloy adjustment requiring controlled Ti addition

The actual FeTi addition should be calculated from the target titanium level, starting steel chemistry, actual Ti content of the batch and your expected titanium recovery.

FeTi70 Chemical Composition

 

The FeTi70 series is available with the same 65–75% titanium range but different impurity limits. This allows the grade to be selected according to the downstream steel specification.

Grade Ti Al ≤ Si ≤ P ≤ S ≤ C ≤ Cu ≤ Mn ≤
FeTi70-A 65–75% 3.0% 0.5% 0.04% 0.03% 0.10% 0.2% 1.0%
FeTi70-B 65–75% 5.0% 4.0% 0.06% 0.03% 0.20% 0.2% 1.0%
FeTi70-C 65–75% 7.0% 5.0% 0.08% 0.04% 0.30% 0.2% 1.0%

Specification note: These values are current product references. Final acceptance should follow the agreed purchase specification and batch COA.

How to Choose FeTi70-A, B or C

 

All three FeTi70 grades provide the same nominal titanium range, so the main purchasing difference is the allowed impurity level.

Grade Selection Consideration
FeTi70-A Tighter Al, Si, P and C limits within the FeTi70 range
FeTi70-B Intermediate impurity specification
FeTi70-C Higher permitted Al, Si, P and C levels where the steel specification allows

If your steel specification has strict limits for Al, Si, C, P or S, those limits should be included in the RFQ rather than ordering only by the name "FeTi70."

How to Estimate FeTi70 Addition

 

The required ferrotitanium amount depends on how much titanium needs to be introduced into the steel and how much of the added titanium is recovered in the final melt.

Required FeTi Mass ≈ Required Recovered Ti ÷ (Actual Ti Fraction × Ti Recovery)

Use the actual batch Ti content and your own process recovery for the final production calculation.

For example, two FeTi materials may both be sold as FeTi70 but have different measured titanium contents within the 65–75% range. The actual batch value should therefore be used when precise alloy addition is important.

Ferrotitanium Size Options

 

FeTi can be supplied as lump material or powder according to the addition method and downstream processing requirements.

Form Available Size
Lump 10–50 mm
Powder 60–325 mesh
Fine Powder 80–270 mesh
Customized Size Available according to order requirements

Particle size should be selected according to the addition method, dissolution requirements, handling process and acceptable fines content.

What to Check Before Buying FeTi70

 

Purchase Item What to Confirm
Ti Content Required titanium range and actual batch value
Al and Si Maximum permitted limits for the target steel grade
C, P and S Maximum impurity limits required by the process
Particle Size Lump or powder specification
Quantity Required metric tons
Packing Required packing method
COA Batch chemistry confirmation

Ferrotitanium Quality Control

 

For FeTi70 orders, quality control should focus on both titanium content and the impurity limits specified by the steel producer.

  • Ti content inspection
  • Al and Si impurity checking
  • C, P and S confirmation
  • Particle-size inspection
  • Fines control when specified
  • Packing inspection
  • Batch COA confirmation

Ferrotitanium Product and Supply

 

FeTi70 ferrotitanium alloy lumps

FeTi70 ferrotitanium alloy

ferro titanium alloy supply

Ferrotitanium alloy supply and inspection

FeTi70 Supply Support

 

We can supply ferrotitanium according to the required grade, chemistry, particle size and packing. Before shipment, the agreed Ti content, impurity limits and physical specification can be confirmed according to the order.

Our broader ferrotitanium range also includes lower-Ti grades for different metallurgical requirements.

What to Send for a FeTi70 Quote

 

To receive a quotation based on the correct specification, please provide:

  • Required FeTi grade
  • Required Ti range
  • Maximum Al, Si, C, P and S limits
  • Required particle size
  • Quantity
  • Packing requirement
  • Incoterm and destination port

Request a FeTi70 Ferrotitanium Quote

Send us your required Ti content, impurity limits, particle size, quantity, packing and application. If you have a target specification or COA, include it with your inquiry so we can confirm the suitable grade.

Email: marketing@zanewmetal.com

Request a Quote

FeTi70 Ferrotitanium FAQ

 

Q: What is FeTi70?

A: FeTi70 is a high-titanium ferrotitanium grade containing approximately 65–75% titanium, with iron as the balance together with controlled impurities.

Q: What is the difference between FeTi70-A, B and C?

A: All three grades use the same 65–75% Ti range, but the permitted levels of Al, Si, C, P and S are different. FeTi70-A has the tighter impurity limits of the three grades shown on this page.

Q: What is ferrotitanium used for in steelmaking?

A: Ferrotitanium is used to introduce titanium into steel for alloy adjustment and for applications where titanium is required to interact with carbon, nitrogen or oxygen during steel treatment.

Q: What sizes of FeTi70 are available?

A: Current supply references include 10–50 mm lumps, 60–325 mesh powder and 80–270 mesh powder. Customized sizes can also be discussed according to the order.

Q: Is 65–75% the purity of ferrotitanium?

A: It is more accurate to describe 65–75% as the titanium-content range of FeTi70 rather than the total purity of the alloy. The remaining material is mainly iron together with controlled residual elements.

Q: Can you provide a batch COA?

A: Yes. Batch chemistry can be confirmed according to the agreed order specification and corresponding inspection record.

Q: What information should I send for a quotation?

A: Send the required FeTi grade, Ti content, impurity limits, particle size, quantity, packing, application, Incoterm and destination port.

Hot Tags: high silicon ferro titanium, China high silicon ferro titanium manufacturers, suppliers, factory, Titanium Powder Metallurgy, FeTi manufacture, Titanium Ferro 30, pure ferrotitanium price, Ferro Titanium Alloy supplier, Titanium Powder Metallurgy price

Send Inquiry

Home

Phone

E-mail

Inquiry