Application of Ferrosilicon 70 in the Field of Refractory Materials
Ferrosilicon 70 (FeSi70) is also used in the refractory industry, where it significantly improves the high-temperature performance and corrosion resistance of refractory materials.
1. How Ferrosilicon 70 Works in Refractories
At high temperature, the silicon in ferrosilicon oxidises to silicon dioxide (SiO2). The SiO2 then reacts with the basic oxides in the refractory matrix - primarily magnesia (MgO) and lime (CaO) - to form silicate phases such as forsterite and calcium silicates. These silicate bonding phases have good high-temperature stability and corrosion resistance, effectively resisting chemical erosion and physical wear in high-temperature environments. The in-situ formation of these bonds strengthens the refractory and improves its resistance to slag attack and thermal shock.
2. Typical Applications
Alumina-silicon carbide-carbon (Al2O3-SiC-C) castables and ramming mixes for iron troughs and blast furnace runner systems.
Low-cement and ultra-low-cement castables where in-situ silicate bonding improves hot strength.
Refractory repair mixes and gunning materials for hot repair.
Typical addition levels are a few percent by weight, tuned to the formulation and service conditions.
3. Selection Notes
Match the silicon content of the ferrosilicon (for example FeSi70 vs FeSi75) and its particle size to the refractory formulation and firing schedule. Confirm the grade, size range and impurity limits with the supplier, as phosphorus and sulfur content affect the refractory bond quality.
Frequently Asked Questions
How does ferrosilicon 70 improve refractories? t high temperature the silicon oxidises to SiO2, which reacts with MgO and CaO in the matrix to form stable silicate bonding phases that resist chemical erosion and physical wear.
Where is FeSi70 typically added? To alumina-silicon carbide-carbon (Al2O3-SiC-C) castables and ramming mixes for iron troughs and blast furnace runner systems, and to low-cement castables.
What are the typical addition levels? few percent by weight, tuned to the formulation and service conditions.
Which properties improve? Hot strength, thermal-shock resistance and slag resistance, through the in-situ silicate bonding phases.
What should be checked when selecting ferrosilicon for refractories? The silicon content of the grade (for example FeSi70 versus FeSi75), the particle size, and the phosphorus and sulfur limits, matched to the formulation and firing schedule.



