May 22, 2025 Leave a message

Basic Specifications of Tantalum Tubes

Grades

Tantalum tube grades include Ta1, Ta2, TaW2.5, TaW7.5, TaW10, TaNb3, TaNb20, TaNb40, and others. The grade designation reflects the base tantalum chemistry and any alloying elements such as tungsten or niobium added for specific strength or corrosion requirements. Tungsten-bearing grades are chosen where higher strength is needed, while niobium-bearing grades suit applications requiring a balance of workability and corrosion performance.

Purity

The purity of pure tantalum tube is greater than 99.95 percent. High purity supports corrosion resistance and consistent behavior in chemical processing and other demanding service conditions. The low impurity level also limits the formation of brittle phases at elevated temperature, which protects the tube during welding and hot service.

Delivery State

Tantalum tubes are supplied in the annealed state (M) or the hard state (Y), depending on the required mechanical properties and downstream forming operations. The annealed condition provides the ductility needed for bending, flaring, and welding in the field, while the hard condition is used when maximum strength is required in the as-supplied part.

Dimensions

For tantalum tubes with an outer diameter generally of 0.8 to 3.0 mm, the wall thickness is 0.05 to 1.0 mm and the length is 100 to 5000 mm. Larger diameters and other dimensional ranges can be agreed according to the purchase specification. Dimensional tolerances should be confirmed with the supplier against the application, since capillary and heat-exchanger tubes have different requirements.

Application Context

Tantalum tubes are used in chemical processing equipment, heat exchangers, and analytical instrumentation where corrosion resistance and biocompatibility are required. The combination of high melting point, dense passive oxide film, and good formability makes tantalum the material of choice for aggressive acid service and for medical and laboratory hardware.

Frequently Asked Questions

What grades of tantalum tube are available? Common grades include Ta1, Ta2, TaW2.5, TaW7.5, TaW10, TaNb3, TaNb20, and TaNb40.

What is the purity of pure tantalum tube? Greater than 99.95 percent.

What delivery states are available? annealed state (M) or hard state (Y).

What are the typical dimensions? For outer diameters of 0.8 to 3.0 mm, wall thickness of 0.05 to 1.0 mm and length of 100 to 5000 mm.

Why is tantalum used in chemical service? Its high melting point, dense passive oxide film, and good formability provide corrosion resistance in aggressive acid service.

Send Inquiry

Home

Phone

E-mail

Inquiry