Apr 10, 2024 Leave a message

Basic Uses of Ferrovanadium

Production of Ferrovanadium

Ferrovanadium is an iron alloy obtained by reducing vanadium pentoxide with carbon in an electric furnace; it can also be produced by the silicon-thermal method in an electric furnace. Both routes are followed by refining to reach the required grade composition.

Main Uses

Ferrovanadium is mainly used to smelt alloy steel. It is widely used in spring steel, bearing steel, tool steel, high-strength rebar and cast iron. Vanadium refines the structure and grains of steel and increases the temperature at which grains coarsen, which improves strength, toughness and fatigue resistance while keeping heat treatment response stable.

Typical Grade Composition

Grade V Al (max) P (max) Si (max) C (max)
FeV40-A 38-45 1.5 0.09 2 0.6
FeV40-B 38-45 2 0.15 3 0.8
FeV50-A 48-55 1.5 0.07 2 0.4
FeV50-B 45-55 2 0.1 2.5 0.6
FeV60-A 58-65 1.5 0.06 2 0.4
FeV60-B 58-65 2 0.1 2.5 0.6
FeV80-A 78-82 1.5 0.05 1.5 0.15
FeV80-B 78-82 2 0.06 1.5 0.2

Note: exact limits follow the applicable delivery specification; the table shows typical production values. Higher vanadium grades are used where maximum recovery and minimal impurity introduction are required.

Frequently Asked Questions

What is ferrovanadium used for? It is mainly used to smelt alloy steel: spring steel, bearing steel, tool steel, high-strength rebar and cast iron, where vanadium refines grains and raises strength.

How is ferrovanadium made? By reducing vanadium pentoxide with carbon or by the silicon-thermal method in an electric furnace.

What does FeV50 mean? It is a ferrovanadium grade with about 48-55 percent vanadium content, commonly used for general alloy steel production.

What is the vanadium content of FeV80? FeV80 contains 78-82 percent vanadium, with tight limits for aluminum, phosphorus, silicon and carbon, and is used where maximum vanadium recovery and minimal impurity input are required.

Why is grain refinement important in vanadium steel? Vanadium raises the temperature at which grains coarsen and refines the steel structure, which improves strength, toughness and fatigue resistance while keeping the heat treatment response stable.

Send Inquiry

Home

Phone

E-mail

Inquiry