May 08, 2025 Leave a message

Chemical Composition of Metal Silicon 1101

Composition Requirements

Metal silicon 1101 has strict requirements on chemical composition. Its silicon content is usually not less than 99 percent, iron content does not exceed 0.1 percent, aluminum content does not exceed 0.1 percent, and calcium content does not exceed 0.01 percent.

Why the Composition Is Controlled

This precise composition control gives metal silicon 1101 specific properties that meet the needs of different industries:

High silicon content: ensures applicability in application scenarios with high requirements for silicon purity, such as aluminum alloy production and chemical synthesis.

Low iron: reduces the adverse effects of iron on electrical properties and on the color and quality of aluminum alloys and chemical products.

Low aluminum and calcium: minimizes impurity-related reactions and improves consistency in downstream processes.

Designation System

The 1101 designation is a common shorthand used in the silicon metal trade: the first two digits refer to the iron and aluminum limits, about 0.1 percent each in this grade family, and the last digit refers to the calcium limit, about 0.01 percent. Lower numbers indicate tighter impurity control.

Typical Applications

Metal silicon 1101 is used in aluminum alloys for automotive and aerospace components, high-purity silicones and chemical intermediates, and as a raw material for polysilicon and electronics applications where purity is decisive.

Frequently Asked Questions

What is the silicon content of metal silicon 1101? Not less than 99 percent, with iron and aluminum each not exceeding 0.1 percent and calcium not exceeding 0.01 percent.

What does 1101 mean in silicon metal? It is a shorthand for the impurity limits: roughly 0.1 percent iron, 0.1 percent aluminum and 0.01 percent calcium.

Where is metal silicon 1101 used? In aluminum alloys, high-purity silicones, chemical intermediates and electronics-related applications.

What is the difference between 1101 and 2202? The designation system reads the same way: 2202 means about 0.2 percent iron, 0.2 percent aluminum and 0.02 percent calcium, so 1101 represents a tighter impurity control than 2202.

How is metal silicon 1101 produced? It is produced by carbothermic reduction of silica in an electric furnace, followed by refining and casting steps that bring the iron, aluminum and calcium levels down to the required limits.

Send Inquiry

Home

Phone

E-mail

Inquiry