Clay refractory bricks Al2O3 content of 30% ~ 40% aluminum silicate material clay products, we often see clay refractory bricks are standard refractory bricks, today we are talking about clay shaped refractory bricks, as well as the characteristics of clay shaped refractory bricks.

Clay brick belongs to the weak acid refractory products, can resist the erosion of acidic slag and acidic gas, the resistance to alkaline substances is slightly worse. Clay bricks have good thermal properties and are resistant to rapid cooling and heating. Refractory brick refractoriness and silica brick is not similar, up to 1690 ~ 1730 ℃, but clay refractory brick load refractory temperature than silica brick about 200 ℃ lower, the main reason is that clay refractory bricks inside in addition to alumina, there are nearly half of the low melting point of the amorphous glass phase, when the temperature reaches 1200 ℃ or so, the low melting point of the clay brick in the gradual melting of the particles due to surface tension The role of the particles by the surface tension and each other against the tight, resulting in volume contraction.

Clay shaped refractory bricks are literally different from the standard refractory bricks, the scope of application: used in blast furnaces, hot blast furnaces, iron furnaces, steel drums and pouring systems and even heat furnace, heating furnace, non-ferrous metal melting furnace, kiln and furnace for the silicate industry and the chemical industry, as well as all the thermal equipment chimneys and chimneys and flues, and so on. Clay shaped refractory bricks can be customized according to the needs of the customer's actual high-temperature equipment, different types of refractory bricks, more flexible, and a wider range of applications, shaped refractory bricks for the manufacturer's requirements are still relatively high, after all, different from the standard refractory bricks, the same clay shaped refractory bricks and the standard refractory bricks, are high temperature resistance, resistance to acid slag erosion, because of the price is cheap, it is very suitable for a number of equipment parts of the temperature is not particularly high requirements. Requirements are not particularly high equipment parts.

If you are interested refractory products, contact us now!
Email: info@zaferroalloy.com Whatsapp: 8615896822096


