Mineral Phase Composition
The mineral phase composition of silica bricks is mainly composed of quartz and cristobalite, with a small amount of tridymite and glassy material. Quartz, cristobalite and residual quartz exhibit significant volume changes due to changes in crystal form at low temperatures, resulting in poor thermal stability of silica bricks at low temperatures.
Thermal Stability and Use Limits
During use, silica bricks must be heated and cooled slowly below 800°C to avoid cracks. Therefore, they are not suitable for kilns with sudden temperature changes below 800°C. Above this temperature, the brick structure becomes stable and the refractory performs well in the hot zone of glass furnaces and coke ovens.
True Specific Gravity as a Quality Indicator
The properties and process of silica bricks are closely related to the crystal transformation of SiO2, therefore the true specific gravity is an important quality indicator. The general requirement is below 2.38, and high-quality silica bricks should be below 2.35. A small true specific gravity reflects a large amount of scale quartz and cristobalite in the brick and a small amount of residual quartz, resulting in small residual linear expansion and stable strength during use.
SiO2 Crystal Variants
Silicon dioxide has seven crystalline variants and one amorphous variant. These variants can be divided into two categories: the first type is quartz, tridymite and cristobalite, which have very different crystal structures and slow transformations between them; the second type is the subspecies of the above variants (alpha, beta and gamma types), whose structures are similar and transform quickly into each other.
Raw Materials and Manufacturing
The raw material for manufacturing silica bricks is silica. The higher the SiO2 content of the silica raw material, the higher the fire resistance. The most harmful impurities are Al2O3, K2O and Na2O, which seriously reduce the fire resistance of refractory products. Silica bricks are made from silica with a SiO2 content of not less than 96%, with mineralizers (such as iron scale and lime milk) and binders (such as molasses and sulfite pulp waste) added; the mix is then blended, formed, dried and fired.
Frequently Asked Questions
What are silica bricks made of? Silica (SiO2 content not less than 96%) with mineralizers and binders, fired into bricks whose mineral phases are quartz, cristobalite and tridymite.
Why is the true specific gravity important? It reflects the degree of conversion of quartz to cristobalite and tridymite; a low value indicates good quality and stable behavior in service.
Where are silica bricks used? In glass melting furnaces and coke oven chambers, where high temperature stability above 800°C is required.
Why must silica bricks be heated and cooled slowly below 800°C? Below this temperature the crystal-form transformations of quartz, cristobalite and residual quartz cause significant volume changes, which can crack the brick under sudden temperature changes.
What impurities are most harmful in silica brick production? l2O3, K2O and Na2O seriously reduce the fire resistance of the product, so the silica raw material should contain not less than 96% SiO2.


