ti round bar factory
(1)Shape of roller
The shapes of the drum include circles, hexagons, octagons, etc. Among them, polygons are more practical. This is because the barrel wall has different radii from the axis and has a certain angle, so the rolling parts are easy to change their orientation, and the chances of collision with each other increase. The grinding is uniform and efficient, thus shortening the rolling time.

titanium round bar factory
(2) Size of drum
The straight calibration is 50mm-100mm, and the length varies depending on the number of grids. The length of the first pattern roller is 600-800mm; the second pattern is 800-1500mm. Usually the larger one is better. This is because the parts are subjected to high pressure and friction in the drum, so the amount of cutting is also increased. But for those parts that are afraid of being stressed and easily deformed, a small roller can be used and the length of the roller can be increased.

titaniun metal bar factory


