Feb 18, 2025 Leave a message

European Industrial Silicon Price Assessment, 18 February 2025: 98.5% and 99% Grades

Assessment Summary for 18 February 2025

The European industrial silicon market was assessed flat on 18 February 2025 across the two grades that dominate regional trade. Both quotations are delivered duty paid (DDP) terms, per tonne, and neither grade moved against the previous reading. The change column is therefore recorded as unchanged rather than as a zero, which is the convention used in physical assessment reporting.

Grade Price Change Unit Terms
98.5% 2200–2250 Unchanged EUR/tonne DDP
99% 2300–2350 Unchanged EUR/tonne DDP

The two rows describe minimum silicon content grades as traded in the region. The 100 EUR per tonne spread between the midpoints of the two ranges is the market's current price for the additional purification step, and it is the number to watch when comparing a delivered offer against a specification that asks for a higher minimum silicon figure.

What a DDP Quotation Actually Contains

A delivered duty paid quotation is the widest scope of delivery used in European physical trade. It means the seller carries the goods to the named destination, clears export formalities, pays the import duty and clears customs at destination, and delivers to the agreed point, with the buyer taking over from there. For a bulk commodity such as industrial silicon the practical consequences are specific.

First, the quotation already includes inland freight, customs clearance and duty, so it cannot be compared line by line against a free on board or cost and freight offer without rebuilding the landed cost. Second, DDP transfer points are often the buyer's warehouse rather than a port, which shifts the risk of transit damage and of demurrage onto the seller and is one reason DDP ranges are wider than port-based ranges. Third, packing assumptions matter: a DDP quote built on one-tonne jumbo bags and a DDP quote built on 25 kg paper sacks describe two different handling costs, and the packing form must be confirmed in writing before the numbers are treated as equivalent.

Mapping 98.5% and 99% to Standard Designations

Trade percentages are shorthand for the minimum silicon content of the lot. They are not grade designations, and the difference matters at receiving inspection. The silicon metal standard GB/T 2881 grades the product by the maximum permitted levels of iron, aluminium and calcium rather than by silicon alone, which is why experienced buyers compare full impurity tables before accepting a substitution.

The combined iron, aluminium and calcium maxima in the common designations explain the relationship. A grade whose combined impurity ceilings total about 1.3%, such as iron 0.5%, aluminium 0.5% and calcium 0.3%, corresponds to a minimum silicon content in the region of 98.5%. A tighter designation whose combined ceilings total about 0.9%, such as iron 0.4%, aluminium 0.4% and calcium 0.1%, corresponds to a minimum silicon content in the region of 99%. The two trade grades quoted above therefore sit in different impurity families, and the 100 EUR per tonne spread reflects that difference rather than a colour or sizing difference.

Trade description Combined Fe + Al + Ca ceiling Silicon content implied
98.5% grade Approximately 1.3% About 98.5% and above
99% grade Approximately 0.9% About 99.0% and above

Silicon content and impurity ceilings are two views of the same analytical result, but only the second is enforceable. A certificate that states 98.5% silicon without the individual iron, aluminium and calcium figures does not allow the buyer to verify that the lot belongs to the family that was ordered.

Why the Two Grades Trade Independently

Although both grades are produced from the same furnaces and the same quartz feedstock, they separate in the market because they serve different downstream routes. The lower grade is consumed mainly by the aluminium industry, where the tolerance for iron and calcium is wider and the cost per tonne of silicon is the deciding factor. The higher grade feeds chemical routes, including the production of silicones and of fumed silica, where residual aluminium and calcium affect catalyst life and product colour.

The result is that the spread between the two grades widens when chemical demand is firm and narrows when aluminium consumption is the only outlet clearing volume. On 18 February 2025 the spread stood at 100 EUR per tonne against midpoints, with neither grade moving, which indicates a market that was balanced across both demand routes on that assessment day.

Verification Points Before Accepting a Delivered Offer

An assessment figure is a starting point for negotiation, not a substitute for lot verification. A buying file should record the following before a delivered cargo is accepted.

Item What to require
Chemistry Individual iron, aluminium and calcium maxima, not silicon content alone
Size fraction Nominal lump range with a stated undersize allowance
Packing Jumbo bag or sack, net weight per unit, liner type
Moisture Maximum moisture and the drying method used to determine it
Delivery basis Incoterm, named place, and the party responsible for import duty

Where a delivered duty paid offer is compared with a port-based offer, the comparison should be rebuilt to the same delivery point before any conclusion is drawn. In practice the difference between the two scopes of delivery on a European inland destination is often larger than the 100 EUR per tonne that separates the two grades, and confusing the two leads to decisions that look favourable on paper but lose money in the warehouse.

Frequently Asked Questions

Q: What were the European industrial silicon assessments on 18 February 2025?
A: The 98.5% grade was assessed at 2200–2250 EUR per tonne and the 99% grade at 2300–2350 EUR per tonne, both delivered duty paid and both unchanged against the previous reading.

Q: Does DDP mean the buyer pays nothing after delivery?
A: The seller pays export formalities, freight, import duty and destination clearance up to the agreed named place. Costs beyond that point, such as unloading, internal handling and any storage, remain with the buyer, and the named place must be stated in writing.

Q: Is a 98.5% quotation the same as a 98.5 grade designation?
A: No. The percentage describes minimum silicon content, while the standard designation is defined by maximum iron, aluminium and calcium levels. Two lots can both be described as 98.5% and still differ in impurity ceilings, so the full table must be compared.

Q: Why is 99% metal quoted only about 100 EUR per tonne above 98.5% metal?
A: The two grades share the same furnaces and raw materials, so the incremental cost is the additional refining and sorting needed to hold tighter impurity ceilings. The spread reflects that incremental cost plus the relative strength of chemical and aluminium demand at the time of assessment.

Q: How large a size range should be expected in a delivered lot?
A: European trade typically quotes lump material in a stated nominal range with an agreed undersize allowance. The allowance and the screening method should be written into the purchase order, because a lot described only as lump cannot be inspected objectively.

Q: Can a buyer substitute 98.5% material for a 99% requirement?
A: Only after checking the individual impurity levels against the process limits. Where the aluminium or calcium ceiling of the lower grade exceeds the limit set by the melting or chemical route, the substitution is not technically acceptable whatever the silicon content shows.

Send Inquiry

Home

Phone

E-mail

Inquiry