Main Uses
Due to its high hardness, wear resistance, high-temperature resistance, and corrosion resistance, ferrochrome is widely used in the metallurgical industry, refractory materials, and the chemical industry. Ferrochromium is mainly used to improve the oxidation resistance and corrosion resistance of steel, and to form an oxide film with strong adhesion after oxidation on the steel surface, which stops or slows further oxidation. Microcarbon ferrochromium is used to make stainless steel, acid-resistant steel, and heat-resistant steel.
Composition Grades
| Grade | Cr (%) | C (max %) | Si (max %) | P (max %) | S (max %) |
|---|---|---|---|---|---|
| FeCr65C0.03 | 60-70 | 0.03 | 1.00 | 0.03 | 0.025 |
| FeCr55C0.03 | 52-60 | 0.03 | 1.5-2 | 0.03-0.04 | 0.030 |
| FeCr65C0.06 | 60-70 | 0.06 | 1.00 | 0.03 | 0.025 |
| FeCr55C0.06 | 52-60 | 0.06 | 1.5-2 | 0.04-0.06 | 0.030 |
| FeCr65C0.10 | 60-70 | 0.10 | 1.00 | 0.03 | 0.025 |
| FeCr55C0.10 | 52-60 | 0.10 | 1.5-2 | 0.04-0.06 | 0.030 |
| FeCr67C6.0 | 60-72 | 6.00 | 3 | 0.03 | 0.04-0.06 |
| FeCr67C9.5 | 60-72 | 9.50 | 3 | 0.03 | 0.04-0.06 |
| FeCr55C10.0 | 52-60 | 10.00 | 3-5 | 0.04-0.06 | 0.04-0.06 |
Common supply sizes include 10-50 mm, 60-325 mesh, and 80-270 mesh with customized sizes. Final acceptance should follow the agreed purchase specification and batch certificate of analysis.
Frequently Asked Questions
What does ferrochrome do in steel? It improves oxidation resistance and corrosion resistance by helping form a strongly adhering oxide film.
What is microcarbon ferrochromium used for? Stainless steel, acid-resistant steel, and heat-resistant steel.
What sizes are available? 10-50 mm lumps and powder grades such as 60-325 mesh and 80-270 mesh.
Q: What is the composition of FeCr65C0.03?
A: Cr 60-70%, C 0.03% max, Si 1.00% max, P 0.03% max and S 0.025% max.
Q: What is the composition of FeCr67C6.0?
A: Cr 60-72%, C 6.00% max, Si 3% max, P 0.03% max and S 0.04-0.06% max.
Q: How does ferrochrome protect steel from oxidation?
A: It helps form an oxide film with strong adhesion on the steel surface after oxidation, which stops or slows further oxidation.
Q: What is the composition of FeCr55C0.06?
A: Cr 52-60%, C 0.06% max, Si 1.5-2%, P 0.04-0.06% and S 0.030% max.
Q: What are the common supply sizes?
A: 10-50 mm lumps and powder grades such as 60-325 mesh and 80-270 mesh, with customized sizes available.


