Mar 07, 2024 Leave a message

Ferrosilicon alloy manufacturers introduce key points for adding recycled iron

1. The recycled iron collected must be the same type of ferrosilicon, and it is strictly prohibited to add other types of ferroalloys.

2. Before adding the returned iron, you should select it. Do not add the iron that is severely slag-added or has too low silicon content into the furnace. The size of the returned iron should not be too large, preferably 50 mm.

 

Ferro Silicon 72

ferro silicon 72 Supplier

 

3. Returned iron should be added to the furnace core or to the inside of the deeper electrode inserted into the charge. The tap hole is inserted deeper into the electrode, and the recycled iron has a higher silicon content, so it can also be added to the inside of the electrode in this phase. It is called a small-capacity electric furnace, and the returned iron must be added around the electrodes. It is strictly prohibited to allow the returned iron to collide with the electrode.

 

Low carbon ferrosilicon

high-silicon ferrosilicon Supplier

 

4. Returned iron should be added into the furnace according to the furnace conditions after tapping. The amount added each time should not be too much to reduce electrode fluctuations.

5. When the silicon content of the products coming out of the furnace is low, do not add returned iron to prevent the production of scrap products.

Send Inquiry

Home

Phone

E-mail

Inquiry