1. What High Carbon Silicon Is
High carbon silicon is a silicon-carbon alloy produced in submerged arc furnaces from quartz, coke and iron-bearing raw materials. It contains silicon, carbon and iron in varying proportions, and the carbon is present both as free carbon and as silicon carbide. It is often used as a lower-cost alternative to part of the ferrosilicon addition.
Commonly supplied compositions fall in ranges such as 50-70 percent silicon with 10-30 percent carbon, and the balance iron and minor impurities. Because there is no single international standard, the exact specification is agreed between buyer and seller.
2. Deoxidation in Steelmaking
In steelmaking, high carbon silicon is used as a deoxidizer. Silicon combines with dissolved oxygen to form silica, which floats into the slag, and the carbon contributes to the deoxidation by forming carbon monoxide gas. The combined effect cleans the steel faster than a single-element deoxidizer in some applications.
The carbon pickup must be considered: for steel grades with a tight carbon specification, the addition is limited or placed where the final carbon can still be corrected.
3. Alloying Agent Applications
Where the steel grade permits carbon, high carbon silicon can replace part of the ferrosilicon alloying addition. This is common in medium and high carbon steels, rail steels and some cast products, where the silicon target is met at a lower material cost.
The silicon content of the alloy raises the strength and deoxidation level of the steel, while the carbon content is absorbed within the grade tolerance. The economic benefit comes from the lower price per unit of silicon compared with standard ferrosilicon.
4. Reducing Agent in Metal Production
High carbon silicon and ferrosilicon are used as reducing agents in the production of other metals and alloys. In pyrometallurgical processes, silicon reduces metal oxides at high temperature, and the carbon and silicon carbide components improve the reducing power and the thermal balance of the charge.
This use is particularly important where a strong, inexpensive reductant is needed, and where the iron content of the alloy can be tolerated in the final product.
5. Handling and Quality Control
High carbon silicon is supplied as lumps, typically 10-100 mm, and packed in big bags or bulk. It should be stored dry, because moisture can cause hydrogen pickup when the material is added to liquid steel.
At delivery, the silicon and carbon contents are verified by chemical analysis, and the size distribution and fines content are checked against the contract. Sampling follows the standard methods applied to ferroalloys.
Confirm the silicon and carbon ranges before ordering.
Store under cover to prevent moisture pickup.
Verify analysis and size distribution at delivery.
Frequently Asked Questions
Q: What is high carbon silicon made of?
It is a silicon-carbon-iron alloy produced in submerged arc furnaces from quartz, coke and iron materials.
Q: How is it used in steelmaking?
As a deoxidizer and as an alloying agent where the carbon content can be tolerated.
Q: What are the typical compositions?
Roughly 50-70 percent silicon and 10-30 percent carbon, with the balance iron.
Q: Why use high carbon silicon instead of ferrosilicon?
It is usually cheaper per unit of silicon where the carbon pickup is acceptable.
Q: How should it be stored?
Dry and under cover, because moisture can cause hydrogen pickup in liquid steel.


