Jan 10, 2024 Leave a message

How to choose equipment to smelt high carbon ferromanganese

Ferromanganese Alloy

 

Self-baking electrode: The quality of high-carbon ferromanganese self-baking electrode depends on the preparation of electrode shell, electrode paste and electrode baking. When the quality of these three aspects cannot be guaranteed, various electrode accidents will occur, such as under-burning of the electrode, leakage of paste, hard break, soft break, etc. It may reduce the load in some cases, or cause a thermal shutdown in severe cases. It not only affects the smelting time and production operation speed of high carbon ferromanganese, but also reduces the furnace bottom temperature.

 

 

ferromanganese alloy

Ferrosilicon Manganese


      Furnace lining: High-carbon ferromanganese furnace lining is an important part of the furnace body, because it has to withstand high temperatures of 1400 ~ 1800 degrees Celsius during use, but also bears the burden of etching, physical and chemical erosion of high-temperature furnace gas, molten iron and slag, So it is easy to melt, soften, melt or even crack. If the thermal insulation performance is not good, it will also increase the power consumption. Therefore, the furnace lining should use special refractory materials and insulation materials.

 

high carbon ferro manganese 75

Carbon Ferro Manganese


     Water cooling equipment: The normal operation of the high carbon ferromanganese electrode water cooling system is very important. The electrode sleeves, copper tiles and conductive copper tubes are cooled with water. The cooling water inlet temperature should be as low as possible, and the outlet temperature should not be too high. The cooling water in the smelting plant is very hard, and sediments in the water are easily deposited at the bottom of the large cover, seriously affecting the cooling effect of the large cover. Spare parts management should be strengthened to shorten hot shutdown time.

Send Inquiry

Home

Phone

E-mail

Inquiry