Feb 28, 2024 Leave a message

Introduction to precautions for repair welding titanium pipes

Titanium tubes are widely used in chemical equipment such as heat exchangers, tube-and-tube heat exchangers, coil heat exchangers, serpentine tube heat exchangers, condensers, evaporators, mechanical accessories, transportation pipelines and other titanium tubes. Fields with high requirements on precision, smoothness, cleanliness and mechanical properties. Generally, the environment where manufacturers repair welded titanium pipes cannot have flowing air, and other aspects are the same as the repair welding of titanium pipes in the welding box.

 

Ti pipe Supplier

titanium straight tube

 

1. The area for repair welding of titanium pipes should not be too large. The flow rate of nitrogen during the repair welding of titanium pipes should be larger, and the gas should not be stopped in the middle;

2. After the repair welding of the titanium pipe is completed, nitrogen protection should be continued until the area cools down;

 

ti alloy tube Supplier

titanium pipe Supplier

 

3. For some specific castings, such as complex thin-walled castings, in order to avoid oxidation of the back side of the titanium pipe area for repair welding, argon gas can be blown onto the back side until the casting cools;

4. Operators who repair welded titanium pipes are required to have a high technical level.

Send Inquiry

Home

Phone

E-mail

Inquiry