What Is Ferrotungsten?
Ferrotungsten is a ferroalloy composed mainly of tungsten and iron, produced by reducing tungsten-bearing raw materials in an electric furnace or by an aluminothermic process. It is the standard carrier used to introduce tungsten into steel and cast iron, and it is supplied in graded lumps of controlled size.
Chemical Composition
The most common commercial grades are FeW 70 and FeW 80, containing roughly 70 percent and 80 percent tungsten respectively. Carbon, silicon, manganese, phosphorus and sulphur are held within specified limits depending on the grade. Aluminium and other residual elements are controlled where clean steel is required.
Physical Properties
Ferrotungsten has a high density, typically about 14 to 15 grams per cubic centimetre depending on grade, and a very high melting range, generally above 1600 degrees Celsius. It is hard and brittle, which is why it is supplied in sized lumps rather than coils or bars. The high density helps the alloy sink through slag and dissolve in the melt.
Chemical Properties and Behaviour
Tungsten is a strong carbide former, so ferrotungsten raises the red hardness and wear resistance of tool steels by forming stable carbides during solidification and heat treatment. The alloy is chemically stable under normal storage and resists oxidation at room temperature, though fine particles may oxidise if kept damp for long periods.
Applications
Ferrotungsten is added to high-speed steels, hot-work tool steels, die steels and some heat-resistant and wear-resistant alloys. It is charged in the furnace or ladle according to the tungsten specification of the heat, with recovery and dissolution time taken into account.
Frequently Asked Questions
Q: What grades of ferrotungsten are available?
FeW 70 and FeW 80 are the most common commercial grades.
Q: Why is ferrotungsten so dense?
Tungsten itself is very dense, giving the alloy a density around 14 to 15 grams per cubic centimetre.
Q: What is ferrotungsten used for?
It adds tungsten to tool steels and wear-resistant alloys.
Q: How does tungsten improve steel?
It forms stable carbides that raise red hardness and wear resistance.
Q: In what form is it supplied?
As sized lumps, because the alloy is hard and brittle.


