Feb 04, 2024 Leave a message

Is it difficult to process titanium alloy rods?

ti round bar stock
 

 

First, the processing of titanium alloy rods is extremely thermally sensitive. Under high temperature or pressure, titanium alloys will quickly soften and oxidize, making processing more difficult and cumbersome. At the same time, it is difficult to weld due to its high melting point (approximately 1668°C). This also requires more stringent temperature and process control during the processing of titanium alloy rods to avoid material deformation or other quality problems.

 

titanium square rod

titanium alloy round bar stock

 

Additionally, the high hardness and sturdiness of titanium rods make them difficult to slow down or remove material. In machining, it is usually necessary to use higher performance and more durable tools for cutting and grinding materials, such as tungsten steel blades, PCD blades, coated blades, etc. At the same time, because titanium alloy rods are corrosive to cutting tools, lubrication and cooling are required to reduce wear during cutting.

 

 

titaniun metal bar

ti alloy round bar stock
 

In addition, due to the high plasticity and low elastic modulus of titanium alloy rods, chip breakage and material deformation are prone to occur. During the machining process, parameters such as appropriate cutting speed, feed rate and cutting depth need to be mastered to ensure uniform chips and prevent material deformation.

Send Inquiry

Home

Phone

E-mail

Inquiry