High-Temperature Furnace Components
Molybdenum rods are widely used in high-temperature furnaces as heating elements, electrodes, supports, and fixtures. Molybdenum has a melting point of about 2620 deg C and retains useful strength at temperatures above 1500 deg C in vacuum or protective atmospheres, which makes it an ideal material for vacuum furnaces used in sintering, brazing, and heat treatment. The rods are machined into heating elements and structural supports that must withstand thermal cycling without sagging.
In glass melting furnaces, molybdenum electrodes conduct electric current through the molten glass, and the rods resist corrosion by the hot glass while providing stable electrical contact.
Molds and Tools
Molybdenum rods are used to make molds, cores, and tooling for the die casting of aluminum and zinc alloys, where the material must resist erosion by the molten metal and thermal fatigue. Molybdenum tooling offers long service life because of its high hardness at temperature and its resistance to soldering with the cast metal. Isothermal forging dies and hot-forming tools also use molybdenum and its alloys for high-temperature service.
The dimensional stability of molybdenum at high temperature allows precision tooling to hold its shape over many production cycles.
Mechanical and Automotive Components
In mechanical engineering, molybdenum rods are machined into shafts, pins, and connectors for high-temperature and wear-resistant service. In automotive applications, molybdenum is used in synchronizer rings, piston rings, and other engine components, either as metal parts or as wear-resistant coatings applied by thermal spraying. The high strength and low thermal expansion of molybdenum contribute to the reliability of these components.
Molybdenum-containing steel parts, made with ferromolybdenum additions, are used throughout the drivetrain for improved hardenability and fatigue strength.
Energy Equipment and Electronics
In the energy sector, molybdenum rods serve in nuclear fuel processing equipment, turbine components, and solar cell manufacturing, where high-temperature capability and corrosion resistance are required. In electronics and semiconductor production, molybdenum is used for electrodes, boats, and fixtures that must operate in vacuum or in reactive gases at high temperature. The combination of high melting point, good conductivity, and low vapor pressure makes molybdenum a reliable material in these demanding applications.
Frequently Asked Questions
Q: What grades of molybdenum rod are available?
Common grades are Mo1 (about 99.95% molybdenum), Mo2, lanthanum-doped molybdenum and TZM alloy (molybdenum with about 0.5% titanium and 0.08% zirconium); rods are supplied against ASTM B387-type specifications.
Q: What is the density of molybdenum?
Molybdenum has a density of about 10.2 g/cm3 and retains useful strength at very high temperature, which is why rods serve as electrodes, heating elements and structural parts in vacuum and inert-gas furnaces.
Q: At what temperature does molybdenum oxidize?
Oxidation becomes significant above about 500-600°C in air, and the volatile molybdenum trioxide formed accelerates attack, so hot-zone molybdenum parts must operate in vacuum, inert gas or with a protective coating.
Q: How are molybdenum rods produced?
Most rods are made by powder metallurgy: pressed and sintered bars are rolled, swaged and drawn to size, then straightened and machined; arc-cast material is used for the largest diameters.
Q: What sizes are available and how are rods delivered?
Diameters from a few millimeters to about 100 mm are available as straight bars, cut lengths or machined parts; black (as-worked) and cleaned or ground surfaces are offered, and the surface condition is agreed with the buyer.
What is the melting point of molybdenum?
Molybdenum melts at about 2620 deg C.
Why are molybdenum rods used in vacuum furnaces?
Molybdenum retains strength above 1500 deg C in vacuum and is used for heating elements and supports.
What is molybdenum used for in die casting?
Molybdenum tooling resists erosion by molten aluminum and zinc and offers long life in die casting.
Where is molybdenum used in automotive engines?
It is used in synchronizer rings, piston rings, and wear-resistant coatings, and in steel parts for the drivetrain.
Why is molybdenum used in electronics?
Its high melting point, conductivity, and low vapor pressure suit electrodes and fixtures in vacuum and semiconductor processes.


