Nuclear Fuel Cladding and Core Components
Zirconium strip is used in the nuclear industry for fuel cladding, spacer grids, and other core components, where the material must combine low neutron absorption with strength and corrosion resistance. The strip is rolled to precise thickness and formed into the required shapes, and the low thermal neutron absorption cross-section of zirconium is the key reason for its use in light water reactors. Zirconium alloys such as Zircaloy-2 and Zircaloy-4 are the standard materials for this service.
The strip is produced with tight dimensional control and clean surfaces, because the performance of the cladding depends on the uniformity of the material.
Chlor-Alkali Electrolyzers
In chlor-alkali plants, zirconium strip is used for cell components, heat exchangers, and piping that handle wet chlorine, hypochlorite, and hot caustic solutions. Zirconium resists these aggressive media better than most metals, and its service life in chlor-alkali service is long. The strip is formed into heat exchanger plates, linings, and support structures that must resist both corrosion and mechanical loading.
The dimensional stability of zirconium at operating temperature and its resistance to chloride attack make it the preferred material for critical chlor-alkali equipment.
Desalination and Chemical Processing
In desalination plants, zirconium strip is used in heat exchangers that handle hot seawater and brine, where its corrosion resistance provides long service life in an environment that is highly aggressive to most metals. In the broader chemical industry, zirconium strip serves in reactors, columns, and heat exchangers handling strong acids and oxidizing media. The self-healing oxide film maintains protection even where the surface is scratched or eroded.
Aerospace High-Temperature Components
Zirconium strip is used in aerospace components that must retain strength at high temperature and resist oxidation and corrosion. The strip is formed into thermal shields, ducts, and structural parts, and zirconium alloys provide a favorable combination of density, strength, and high-temperature capability. These components operate in environments where weight must be minimized without sacrificing reliability.
Frequently Asked Questions
Q: What thicknesses of zirconium strip are produced?
Strip is typically produced in thicknesses of about 0.2-3 mm as coils or cut lengths, with tolerances agreed per order; thinner material is classified as foil and thicker material as plate.
Q: How is zirconium strip welded without embrittlement?
Welding is done with TIG or electron beam under strict argon shielding on clean material, because oxygen, nitrogen and hydrogen pick-up embrittles the weld and destroys corrosion resistance; back-purging is used on the weld root.
Q: What surface finishes are available?
Strip can be supplied pickled, ground or bright annealed; the finish is chosen by application, with bright, clean surfaces preferred for welded heat-exchanger components and pickled surfaces for general chemical service.
Q: What standards and grades apply?
Strip is supplied against ASTM B551 in grades R60702, R60704 and R60705, with chemical analysis, tensile properties and surface inspection documented on the mill certificate per lot.
Q: Why is annealed strip used for forming?
Fully annealed strip is soft and ductile, allowing deep drawing and bending into heat-exchanger plates and baffles without cracking; stress-relieved or hard tempers are supplied when the part must hold shape or spring force.
Why is zirconium strip used in nuclear reactors?
Zirconium has a low neutron absorption cross-section, so it is used for fuel cladding and core components in light water reactors.
What makes zirconium suitable for chlor-alkali service?
Zirconium resists wet chlorine, hypochlorite, and hot caustic solutions better than most metals.
Where is zirconium strip used in desalination?
It is used in heat exchangers that handle hot seawater and brine because of its corrosion resistance.
What grades of zirconium are used?
Zirconium alloys such as Zircaloy-2 and Zircaloy-4 are standard for nuclear service, and grades such as R60702 serve chemical applications.
How is zirconium strip produced?
It is produced by rolling zirconium ingots with hot and cold working and intermediate vacuum annealing.


