Mar 13, 2024 Leave a message

Ferromolybdenum Products: Composition and Applications

What Is Ferromolybdenum?

Ferromolybdenum is a master alloy of molybdenum and iron used to introduce molybdenum into steel and cast iron. Molybdenum improves hardenability, high-temperature strength and corrosion resistance, so the alloy is important in alloy steels, tool steels, stainless steels and heat-resistant grades.

Common Grades and Composition

The most widely traded grade is FeMo60, containing about 60 percent molybdenum, with FeMo70 available where a more concentrated additive is preferred. Alongside molybdenum and iron, the alloy contains controlled amounts of silicon, sulphur, phosphorus, carbon and copper. Impurity limits are set so that the alloy does not harm the cleanliness of the steel being treated.

Production Routes

Ferromolybdenum is produced mainly by aluminothermic reduction of molybdenum oxide, a fast exothermic reaction that yields an ingot which is then crushed and sized. Some material is produced in an electric furnace. After cooling, the alloy is broken into lumps within the size range required for charging.

Role in Steelmaking

Molybdenum is added to raise hardenability so that thick sections can be through-hardened, and to improve creep strength and resistance to certain corrosive media. In stainless steels it improves resistance to pitting and crevice corrosion. Because molybdenum is costly, recovery must be managed carefully during addition.

Handling and Quality Checks

Lots are sampled and analysed for molybdenum and residual elements, and the size distribution is verified. Consistent chemistry and sizing give predictable recovery, which is critical when hitting tight molybdenum specifications in the finished heat.

Frequently Asked Questions

Q: What is the most common ferromolybdenum grade?
FeMo60, containing about 60 percent molybdenum.

Q: Why is molybdenum added to steel?
To raise hardenability, high-temperature strength and corrosion resistance.

Q: How is ferromolybdenum produced?
Mainly by aluminothermic reduction of molybdenum oxide, then crushing and sizing.

Q: Which impurities are controlled?
Silicon, sulphur, phosphorus, carbon and copper.

Q: Where is it used?
Alloy steels, tool steels, stainless steels and heat-resistant grades.

Send Inquiry

Home

Phone

E-mail

Inquiry