Feb 05, 2024 Leave a message

Purifying Titanium Rod Processing Residues

1. Disposal of Crumb-Like Residual Materials

The process flow of processing scraps is: titanium scraps, crushing, cleaning, drying, screening, removal of high-density metal inclusions, distribution, inspection, packaging, and storage.

The chips can be crushed by a herringbone gear roller crusher or a hammer crusher. Cleaning is done on a cleaning machine. Use a hot air dryer or electric dryer to dry the cleaned titanium chips. Titanium chips are screened in a double-hole screen. After screening, the scoop chips are first separated by an air separator, and then processed by a strong magnetic separator to remove high-density metal inclusions (alloy cutter heads mixed in titanium chips, etc.). Titanium chip distribution is carried out on a spreading machine to evenly distribute chips with differences in composition, geometric size, etc. The crumb-shaped residual materials that have been purified and passed the inspection are the recycled materials.

2. Treatment of Lumpy Residual Materials

The processing flow of block residues is: block residues, brand identification, fixed-length cutting, removal of the surface contamination layer, inspection, packaging, and storage.

(1) Brand identification: Eddy current conductivity meters, steel inspection mirrors, and mobile direct-reading spectrometers are used to identify blocky residues. Pure titanium and alloys can be quickly distinguished, and the elements contained in the residues can be determined; the mobile direct-reading spectrometer can also directly and accurately measure the titanium content.

(2) Cutting to length: Cutting adopts shears, crocodile shears, etc., or self-cutting with fire.

(3) Surface cleaning: Alkaline cleaning or ultrasonic cleaning machines can be used to treat surface oil stains on plates, pipes, etc., and pickling or shot blasting machines can be used to treat surface oxide layers and contamination on forging blocks and other materials.

Frequently Asked Questions

Why is magnetic separation used? To remove high-density metal inclusions such as alloy cutter heads mixed into titanium chips.

How are lumpy residues identified? By eddy current conductivity meters, inspection mirrors, and mobile direct-reading spectrometers.

How are surface contaminants removed? By alkaline or ultrasonic cleaning for oil, and pickling or shot blasting for oxide layers.

Send Inquiry

Home

Phone

E-mail

Inquiry