Mar 28, 2024 Leave a message

Pure Magnesium Ingot Properties and Applications

Overview of Pure Magnesium Ingot

Pure magnesium ingot is the primary commercial form of magnesium metal, usually supplied with a magnesium content of 99.8 percent or higher. Magnesium is the lightest structural metal, with a density of about 1.74 grams per cubic centimetre, roughly two thirds that of aluminium and one quarter that of steel. This combination of low weight, good strength-to-weight ratio and excellent machinability makes pure magnesium ingot a fundamental raw material for modern industry.

Key Properties of Magnesium

Magnesium melts at about 650 degrees Celsius and boils near 1090 degrees Celsius, which is low enough for convenient casting but high enough for most structural service. It has good thermal and electrical conductivity, high damping capacity and excellent machinability, allowing very fast cutting and turning with low tool wear. Pure magnesium is chemically active and forms a protective oxide film in dry air, but it can corrode in salt environments unless alloyed or coated, so surface protection is considered in every application.

Production Routes

Most primary magnesium is produced by electrolysis of molten magnesium chloride, obtained from seawater, brine or magnesite, or by the silicothermic Pidgeon process, in which calcined dolomite is reduced by ferrosilicon under vacuum at high temperature. The refined metal is cast into ingots of standard weights such as 7.5 kilograms, with surface cleaned and inspected before packing. Analysis by spectrometry confirms the magnesium content and the levels of iron, silicon, copper, nickel and other trace elements.

Applications in Alloys and Steelmaking

The largest use of pure magnesium is as a constituent of aluminium alloys, where additions of 0.5 to 10 percent improve strength, corrosion resistance and weldability. Magnesium alloys themselves serve in automotive parts, power tools and portable electronics, where weight saving is critical. In steelmaking, magnesium is used for hot metal desulfurization, either as a cored wire or as granular feed, reacting with sulfur to form magnesium sulfide that is removed into the slag.

Other Industrial Uses

Magnesium is the reducing agent in the Kroll process for producing titanium sponge, and it is used in the production of beryllium, zirconium and hafnium. Sacrificial anodes made from magnesium protect pipelines, storage tanks and ship hulls from corrosion. Emerging applications include magnesium batteries, hydrogen storage materials and lightweight structural components in aerospace and motorsport, where every kilogram of mass saved improves performance and fuel economy.

Frequently Asked Questions

Q1: What is the typical purity of pure magnesium ingot?
A1: Commercial pure magnesium ingot is normally supplied with a magnesium content of 99.8 percent or higher, verified by spectrometric analysis.

Q2: Why is magnesium called the lightest structural metal?
A2: Its density of about 1.74 grams per cubic centimetre is lower than aluminium and steel, while still providing useful mechanical strength for structural components.

Q3: How is pure magnesium produced?
A3: The two main routes are molten salt electrolysis of magnesium chloride and the silicothermic Pidgeon process, which reduces calcined dolomite with ferrosilicon under vacuum.

Q4: What is the role of magnesium in steelmaking?
A4: Magnesium is injected into hot metal as a desulfurizer, forming magnesium sulfide which is removed with the slag, achieving very low sulfur levels in the steel.

Q5: Why is magnesium used in titanium production?
A5: In the Kroll process, magnesium reduces titanium tetrachloride to titanium sponge, and the resulting magnesium chloride is recycled back to the electrolysis cell.

Q6: In what forms is magnesium ingot packed?
A6: Ingots are commonly cast at 7.5 kilograms, stacked on pallets and strapped or packed in export cartons after surface cleaning and inspection.

Send Inquiry

Home

Phone

E-mail

Inquiry