What Is Ferrosilicon?
Ferrosilicon is a ferroalloy of silicon and iron produced by reducing silica in an electric furnace. It is one of the most widely used additives in steelmaking because silicon has a strong affinity for oxygen and is also an alloying element. The alloy is supplied in grades defined by silicon content and in a range of size fractions.
Standard Grades
The main commercial grades are ferrosilicon 45, 65, 72 and 75, where the number indicates the nominal silicon content. Lower grades are used where a smaller silicon addition is needed or where the grade is adequate for the duty, while higher grades concentrate the silicon and reduce the mass that must be charged per heat.
Deoxidation Function
Silicon removes dissolved oxygen from molten steel by forming stable silica that joins the slag. Deoxidation lowers the oxygen level and prevents defects such as porosity and oxide inclusions in the cast product. Diffuse deoxidation and final deoxidation steps may use different grades and sizes to suit the stage of the process.
Alloying and Inoculation
In electrical steels, spring steels and other silicon-bearing grades, ferrosilicon is also the alloying carrier that raises silicon to the specified level. In cast iron, ferrosilicon is used for inoculation, where it promotes graphite formation and controls the structure of the casting.
Choosing a Grade
Grade and size selection depends on the silicon target, the required recovery, the charging system and the stage of the heat. Consistent chemistry and sizing give predictable recovery, which is essential for meeting tight silicon ranges and for controlling cost.
Frequently Asked Questions
Q: What do ferrosilicon grade numbers mean?
They indicate the nominal silicon content, such as 45, 65, 72 and 75 percent.
Q: What is ferrosilicon used for?
Deoxidation, alloying and inoculation in steel and iron.
Q: Why do grades differ?
To match the silicon addition and charging system of each process.
Q: How does deoxidation work?
Silicon forms stable silica that floats into the slag and lowers dissolved oxygen.
Q: What is inoculation?
Adding ferrosilicon to cast iron to control graphite formation and structure.


