Silicon Briquette Ball 50
The entire production process of silicon carbon balls is raw materials and adhesives, mixing, stirring, ball making, drying, finished products, bagging, weighting, and stacking.
Silicon Briquette 50
In the steelmaking industry, the temperature-increasing deoxidation process is mainly used, but due to the high price of ferrosilicon, it directly affects the production cost of steel. In order to change this market situation, many auxiliary steelmaking materials have emerged that can replace ferrosilicon, and silicon carbon balls are one of them. Silicon carbon balls can replace part of ferrosilicon and carburizer, so that heating, deoxidation and carburization can be completed at one time. After adding molten steel, they will not be damaged by blowing, will not cause open flames, and have high utilization rate. It improves the original process of adding various powders. The burning loss and environmental pollution caused by deoxidation and carburizing agents during use. The silicon carbon balls sink into the molten steel due to the gravity of the pellets, and gradually float up from the bottom of the furnace to produce carbon monoxide, which serves to stir the molten steel and can effectively improve the situation. Improve the quality of steel, and at the same time turn a large amount of industrial waste into treasure and reduce the production cost of steel.
Heigh Quality Ferrosilicon Briquette 50
As can be seen, silicon carbon balls play a very important role in the steelmaking industry, such as achieving temperature increase, deoxidation and carburization, reducing production costs, etc.
