Green Silicon Carbide
Research tools should meet the following basic requirements:
(1) The grinding tool itself must have appropriate surface geometry. The grinding tool can accurately transmit its surface geometry to the workpiece being lapped. Under different conditions, the requirements for the surface geometry accuracy of the grinding tool itself are also different.
(2) The grinding tool should have good wear resistance. In order to maintain the surface geometry accuracy of the grinding tool itself, the grinding tool must have good wear resistance.
black silicon carbide
(3) The grinding tool should have sufficient rigidity. During grinding, if the rigidity of the grinding tool is insufficient, it will deform or even break after being stressed. This destroys the geometric accuracy of the surface of the grinding tool and cannot meet the requirements of machining accuracy.
(4) Lapping tools should be dimensionally stable and maintain deformation-free performance under continuous use and constant changes in room temperature.
silicium carbide
Not only the abrasives must meet certain requirements, but also the grinding tools must meet the requirements to a certain extent. At the same time, they must have good sand-embedding properties. The grinding tools must be easy to insert sand, firmly and uniformly embedded, and make them effective. Sharp cutting ability. Zhenan Metallurgy specializes in the production and research and development of silicon carbide products for steelmaking, as well as the production and sales of metal materials including metallic silicon. If you have any concerns about our products, you are welcome to call us for consultation.
