Overview of Titanium Alloy Rod Standards
Titanium alloy rods are supplied against recognised international standards that define chemistry, dimensions, tolerances, surface condition and mechanical properties. The two most widely used specifications are ASTM B348 for titanium and titanium alloy bars and billets, and Chinese standard GB/T 2965 for titanium and titanium alloy bars. Understanding these standards is essential for buyers, because the same nominal grade can differ in tolerance, testing and certification between specifications.
Key Standards in the Market
ASTM B348 covers bars and billets of commercially pure titanium and titanium alloys for general industrial use, and it is the common reference for North American and export business. GB/T 2965 is the corresponding Chinese standard, widely used in the domestic market and in projects built to Chinese specifications. For medical implants, ASTM F136 and ISO 5832-3 apply to the special Ti-6Al-4V ELI alloy, and for aerospace applications, AMS specifications add stricter control of microstructure and ultrasonic quality.
The Titanium Grade System
Commercially pure grades are designated TA1, TA2 and TA3 in the Chinese system, equivalent to ASTM grades 1, 2 and 3, with strength rising and ductility falling as the interstitial content increases. The alpha-beta workhorse TC4, equivalent to ASTM grade 5 or Ti-6Al-4V, offers the best combination of strength, toughness and weldability. Higher-strength alpha-beta and beta alloys such as TC11 and TC17, equivalent to Ti-6Al-2Sn-2Zr-2Mo and Ti-17, are reserved for demanding aerospace and engine applications.
Dimensional and Surface Specifications
Rod diameter, length, straightness and ovality are all defined by the standard, with tolerances depending on the production route: forged, rolled, drawn or ground. The surface condition must be specified as black, pickled, machined or ground, because it affects both cost and the allowable defect level. Mechanical properties such as tensile strength, yield strength and elongation are verified on samples from each heat, and the delivery state, annealed or solution treated and aged, must be stated on the certificate.
Applications of Different Grades
Commercially pure grades TA1 to TA3 are used in chemical equipment, heat exchangers and architectural work where corrosion resistance matters more than strength. TC4 dominates aerospace fasteners, structural parts and medical implants because of its balanced properties. High-strength alloys such as TC17 serve fan discs and compressor components in gas turbines, where fatigue strength and temperature capability are critical, and their supply requires special process control.
Frequently Asked Questions
Q1: What standards apply to titanium alloy rods?
A1: ASTM B348 and GB/T 2965 are the main general standards, with ASTM F136 for medical implants and AMS specifications for aerospace.
Q2: What does grade TA1 mean?
A2: TA1 is commercially pure titanium, equivalent to ASTM grade 1, with the lowest strength and highest ductility of the pure grades.
Q3: What is TC4 equivalent to?
A3: TC4 is equivalent to Ti-6Al-4V or ASTM grade 5, the most widely used alpha-beta titanium alloy.
Q4: What surface conditions are available?
A4: Rod can be supplied black, pickled, machined or ground, with the condition affecting tolerances, defect limits and cost.
Q5: How are mechanical properties verified?
A5: Tensile, yield and elongation tests are performed on samples from each heat, and results are reported on the certificate.
Q6: Which grade is used for medical implants?
A6: Ti-6Al-4V ELI, supplied to ASTM F136, is the standard implant grade because of its biocompatibility and fracture toughness.


