Mar 27, 2024 Leave a message

The Use of Cored Wire in Steelmaking and Casting

Main Use

Alloy cored wire is mainly used in steelmaking and casting. The use of cored wire in steelmaking can purify the form of steel inclusions, improve the castability of molten steel, improve the performance of steel, significantly increase the yield of alloys, reduce alloy consumption, and reduce steelmaking costs, with significant economic benefits.

Types of Cored Wire

Type Main Components (%) Wire Diameter (mm) Strip Thickness (mm) Core Powder Weight (g/m) Uniformity (%)
Silica calcium wire Si55Ca30 13 0.35 230 2.5-5
Aluminum calcium wire Ca26-30 Al3-24 13 0.35 210 2.5-5
Calcium iron wire Ca28-35 13 0.35 240 2.5-5
Silica calcium barium wire Si55 Ca15 Ba15 13 0.35 220 2.5-5
Silica aluminum barium wire Si35-40 Al12-16 Ba9-15 13 0.35 215 2.5-5
Silica calcium aluminum barium wire Si30-45 Ca9-14 13 0.35 225 2.5-5
Carbon cored wire C98 S less than 0.5 13 0.35 150 2.5-8
High magnesium wire Mg28-32 RE2-4 Ca1.5-2.5 Ba1-3 13 0.35 - 2.5-5
Silicon barium wire Si60-70 Ba4-8 13 0.35 230 2.5-5

The values shown are typical supply references; final acceptance should follow the agreed purchase specification and batch certificate of analysis.

Frequently Asked Questions

What is alloy cored wire used for? It is mainly used in steelmaking and casting to purify inclusions, improve castability, and raise alloy yield.

What types of cored wire are available? Silica calcium, aluminum calcium, calcium iron, silica calcium barium, silica aluminum barium, carbon, high magnesium, and silicon barium wires.

What is the typical wire diameter? Commonly 13 mm, with a strip thickness of 0.35 mm.

Q: What is alloy cored wire mainly used for?
Alloy cored wire is used in steelmaking and casting to purify inclusions, improve castability, raise alloy yield, and reduce steelmaking cost.

Q: How does cored wire purify inclusions?
Feeding calcium or calcium silicon wire forms low-melting calcium aluminates that float out, modifying alumina inclusions into harmless shapes.

Q: Why does cored wire raise alloy yield?
The powder is released deep in the melt, avoiding oxidation at the surface and contact with slag, so more alloy enters the steel.

Q: How does cored wire improve castability?
By modifying inclusions and controlling dissolved oxygen, cored wire treatment prevents nozzle clogging during continuous casting.

Q: What powder types are common in cored wire?
Common powders are calcium silicon, calcium iron, silicon calcium barium, aluminum, titanium, boron, and rare earth materials.

Send Inquiry

Home

Phone

E-mail

Inquiry