What Is Ferrochrome?
Ferrochrome, also called ferrochromium or FeCr, is an iron-chromium alloy used mainly to introduce chromium into steel and other ferrous alloys. Commercial ferrochrome is available in high-carbon, medium-carbon, low-carbon, and very-low-carbon specifications, with the appropriate grade depending mainly on the required chromium addition and the remaining carbon allowance in the steel. Common supply sizes include 10-50 mm, 50-100 mm, and 10-100 mm, with other sizes agreed according to the charging system and furnace practice.
Main Types of Ferrochrome
| Type | Carbon Position | Selection Logic |
|---|---|---|
| Very-low / micro-carbon FeCr | Lowest carbon range | Used when chromium is required with very limited additional carbon |
| Low-carbon FeCr | Low carbon | Selected for steel grades with tighter carbon control |
| Medium-carbon FeCr | Intermediate carbon | Used where some carbon input is acceptable |
| High-carbon FeCr | Highest carbon range | Common bulk chromium source where the route can accommodate its carbon |
Typical Chemical Composition
| Type | Grade | Cr (%) | C (%) | Si (%) | P (%) | S (%) |
|---|---|---|---|---|---|---|
| Micro carbon | FeCr-1 | 58-68 | 0.03-0.15 | 1.0-2.0 | 0.03-0.06 | 0.025-0.03 |
| Micro carbon | FeCr-2 | 63-68 | 0.03-0.15 | 1.0-2.0 | 0.03-0.06 | 0.025-0.03 |
| Low carbon | FeCr-3 | 58-68 | 0.25-0.5 | 1.5-3.0 | 0.03-0.06 | 0.025-0.03 |
| Low carbon | FeCr-4 | 63-68 | 0.25-0.5 | 1.5-3.0 | 0.03-0.06 | 0.025-0.03 |
| Medium carbon | FeCr-5 | 58-68 | 1.0-4.0 | 1.5-3.0 | 0.03-0.06 | 0.025-0.03 |
| Medium carbon | FeCr-6 | 63-68 | 1.0-4.0 | 1.5-3.0 | 0.03-0.06 | 0.025-0.03 |
| High carbon | FeCr-7 | 58-68 | 4.0-10.0 | 3.0-5.0 | 0.03-0.06 | 0.03-0.06 |
| High carbon | FeCr-8 | 63-68 | 4.0-10.0 | 3.0-5.0 | 0.03-0.06 | 0.03-0.06 |
These values are supply reference specifications; final composition should follow the agreed purchase specification and shipment batch COA.
How Is Ferrochrome Produced?
High-carbon ferrochrome is commonly produced by reducing chromite-bearing raw material with a carbonaceous reductant at high temperature, then tapping, solidifying, crushing, and classifying the alloy. Lower-carbon ferrochrome requires additional control of carbon during production through different refining and reduction routes.
Frequently Asked Questions
What is ferrochrome mainly used for? To introduce chromium into steel and other iron-based alloys; the required grade depends on the target chromium content and carbon allowance.
What is the difference between high-carbon and low-carbon ferrochrome? The main difference is carbon content delivered together with chromium.
What chromium content does ferrochrome contain? The reference specifications on this page cover approximately 58 to 68 percent Cr depending on grade.
What ferrochrome particle size is commonly supplied? Common sizes include 10-50 mm, 50-100 mm, and 10-100 mm, with custom sizes available.


