Tungsten occupies a unique position among engineering metals because it has the highest melting point of all elements, about 3422 degrees Celsius, and a density close to 19.3 grams per cubic centimetre. These properties make it indispensable where extreme heat and erosion must be resisted, and the metal is supplied in several standard mill forms to suit different fabrication routes.
Core Physical Properties
Tungsten combines a very high melting point with high density, low thermal expansion and good thermal conductivity. It has the lowest vapour pressure of the common metals, which means it resists evaporation even at high temperature, and it retains useful strength well above the working range of steels and nickel alloys. The metal is brittle at room temperature, so it is usually worked at elevated temperature and supplied in the recrystallised or stress relieved condition. Commercial purity is commonly 99.95 percent or higher, and residual elements are controlled because they strongly influence ductility and grain structure.
Tungsten Plate and Sheet
Tungsten plate is produced by powder metallurgy, sintering and hot rolling, followed by careful machining and stress relief. It is used for furnace hearths, heat shields, radiation shielding, sputtering targets and electrodes, and as a backing material in high temperature assemblies. Thickness and flatness tolerances matter in these applications because the plate often serves as a structural element in a thermal environment. ASTM B760 is a widely referenced specification for tungsten plate, sheet and strip, and it defines chemistry, density and mechanical requirements together with permissible defects.
Tungsten Rod and Tube
Tungsten rod is formed by swaging, rolling or drawing and is supplied in diameters from a few millimetres upward. It is used for electrodes, welding and evaporation sources, glass melting components and as a dense counterweight or ballast where volume is limited. Tungsten tube offers the same thermal and erosion resistance in a hollow form, which allows it to be used as a thermocouple protection sheath, a high temperature thermowell or a crucible liner. Because the metal is difficult to machine, suppliers usually deliver near net shapes and tight straightness tolerances to reduce waste at the user's plant.
Tungsten Crucibles and High Temperature Service
Tungsten crucibles are used for melting and evaporating metals and oxides that would attack ceramic vessels, notably in sapphire growth, vacuum metallising and rare earth processing. They combine high temperature capability with low reactivity, and their thermal expansion is close to that of some refractory oxides, which helps limit stress during thermal cycling. Service life depends on avoiding contamination by oxygen, because oxidation above about 400 degrees Celsius degrades the surface rapidly, so crucibles are normally used under vacuum or a protective atmosphere.
Defence, Aerospace and Electronic Applications
The density of tungsten makes it valuable where mass must be concentrated. Defence applications include kinetic energy penetrators and dense projectiles, together with shielding and counterweight parts for airborne and ground platforms. Aerospace uses include nozzle and engine components, ballast and high temperature structural parts. In electronics, tungsten serves as filaments, contact material and diffusion barriers, while its carbide form dominates cutting tools. The combination of density, thermal stability and modest cost relative to other refractory metals keeps demand for tungsten mill products strong across sectors.
Frequently Asked Questions
Q: What is the melting point of tungsten?
Tungsten melts at approximately 3422 degrees Celsius, the highest melting point of all metallic elements.
Q: Why is tungsten brittle at room temperature?
Tungsten has a body centred cubic structure with a high ductile to brittle transition temperature, so it is shaped at elevated temperature and handled with care when cold.
Q: Which standard covers tungsten plate?
ASTM B760 is commonly referenced for tungsten plate, sheet and strip, covering chemistry, density and mechanical properties.
Q: Can tungsten be used in air at high temperature?
No. Tungsten oxidises readily above about 400 degrees Celsius, so high temperature service requires vacuum or a protective or inert atmosphere.
Q: Why is tungsten used in military projectiles?
Its very high density concentrates mass in a small volume, which supports the penetrating performance expected in kinetic energy projectiles.


