Pure titanium alloy filler wire
Broken welding wire
When the welding wire breaks, it will cause large defects in the welded joint and affect the quality of the welded joint.

Pure ti alloy filler wire
Solution:
1. Check the wire feed device: The broken welding wire may be due to a fault in the wire feed device, such as damage to the wire feed wheel, spring deformation, etc. The wire feed device needs to be checked and replaced or repaired in time.
2. Check the welding machine circuit: The broken welding wire may also be due to welding machine circuit problems, such as excessive voltage, burnt electrodes, etc. The welding machine circuit needs to be checked and replaced or repaired in time.
3. Select appropriate welding parameters: When welding, it is necessary to select appropriate welding parameters, including parameters such as current and speed, to ensure normal transportation of the welding wire and achieve the ideal welding effect.

99.9% titanium filler wire
To sum up, the common failures and solutions of titanium welding wires are diverse and require effective diagnosis and treatment according to specific conditions in actual welding applications. Only through timely processing can the quality of titanium welding wire and the quality stability of welded joints be guaranteed.


