Dec 01, 2025 Leave a message

Which FeSi Is Best for Electrical Steel

Introduction

 

Electrical steel-often used in motors, transformers, and power equipment-has very specific requirements when it comes to alloy additives. Although ferrosilicon (FeSi) is widely used across the steel industry, the needs of electrical steel are more precise than those of ordinary carbon steel. Below are several practical questions that overseas buyers often ask when choosing the right FeSi grade for electrical steel production.

 

Industry Q&A: Which FeSi Is Best for Electrical Steel?

 

Q1: Why does electrical steel require a specific type of FeSi?

Electrical steel is designed for magnetic performance-low core loss, high permeability, and stable grain structure.
In this type of steel, silicon plays a key role in:

✦Reducing magnetic loss

✦Improving resistivity

✦Stabilizing the microstructure

✦Increasing the material's efficiency in power applications

Because of this, electrical steel needs FeSi that is both high purity and chemically stable, ensuring that no unwanted impurities disturb grain growth or magnetic behavior.

 

Q2: Which FeSi grade is generally recommended for electrical steel?

For electrical steel, mills typically choose FeSi75 rather than FeSi72 or lower grades.
The reasons are simple:

✦Higher silicon content (around 75%) provides better control during alloying.

✦Lower impurity levels, especially phosphorus (P), sulfur (S), aluminum (Al), and carbon (C).

✦More predictable recovery, which is essential for magnetic steel grades.

While FeSi72 can be used in some cases, FeSi75 gives cleaner and more stable results, especially for high-end electrical steel.

 

Q3: What impurities matter most for electrical steel?

Electrical steel is sensitive to several impurities, particularly:

✦Phosphorus (P) – increases brittleness and harms magnetic properties

✦Sulfur (S) – reduces ductility

✦Aluminum (Al) – affects grain orientation

✦Carbon (C) – may alter magnetic loss

For this reason, producers often request FeSi75 with strict impurity limits, and sometimes even specify maximum values for each element.
The purer the FeSi, the more predictable the final steel quality.

 

Q4: Does particle size matter for electrical steel production?

Yes.
In electrical steel production, many mills prefer smaller or mid-sized particles, such as:

✦1–5mm

✦3–8mm

These sizes melt quickly and allow for fine adjustments in the alloying process, particularly during refining.
Larger sizes like 10–50mm can still be used, but finer control is often needed for magnetic steel grades, making smaller particle FeSi more suitable.

 

Q5: How do steel mills normally evaluate FeSi before using it for electrical steel?

Most mills will check:

✦Silicon content stability

✦Impurity consistency

✦Particle size distribution

✦Melting behavior

✦Recovery rate

Some plants even run small trial additions to see how the FeSi reacts in their specific furnace setup, especially when switching suppliers or adjusting to new electrical steel compositions.

 

About Our Products

 

We supply FeSi75 with stable silicon content and carefully controlled impurities, which many customers use for electrical steel and other high-precision applications. If you're comparing FeSi grades or checking suitability for magnetic steel, we can share recent COAs, recommended particle sizes, and updated FOB prices. Just let us know your furnace type or steel grade, and we'll help you find the FeSi that fits best.

Ferrosilicon Lumps
High-Quality Ferrosilicon Lumps
Ferrosilicon Supply – Factory Direct Shipping
Ferrosilicon Supply – Factory Direct Shipping

Get A Quote Now

 

 

 

 

Send Inquiry

Home

Phone

E-mail

Inquiry