Jan 02, 2024 Leave a message

75 Ferrosilicon manufacturers introduce the symptoms of excess reducing agent

Silicon Ferro

 

1. The electrode insertion depth is shallow

The amount of coke in the charge is excessive. The resistance of coke is small and the conductivity is strong. The current passing through the charge increases. Therefore, the electrode rises, and even the electrode rises to the upper limit, causing the electrode to be inserted shallowly in the charge.

2. The area around the electrode is prone to collapse and shrinkage due to drying.

 

ferrosilicon powder

Ferro Alloy

 

Due to the excess amount of coke, the electrode rises, the insertion depth is shallow, the high temperature zone moves upward, the crucible gradually shrinks, and the material layer around the electrode is thin, so collapse and ignition are easy to occur.

The noise of the arc is loud, and even the furnace material cannot bury the arc, causing the furnace mouth temperature to rise.

Excess coke in the charge reduces the cohesion of the charge, which is also the cause of material collapse.

 

fesi ferrosilicon

 

Ferro Silicon 75

 

3. The flame on the material surface is blue and weak.

The excess coke in the charge will cause a combustion reaction. The flame is blue and weak.

4. The root of the electrode sparks fire

There is excess coke in the charge, and more silicon carbide (SiC) is easily generated in the path. It stands on the surface of the electrode that has been embedded in the charge, so it is easy to ignite from the root of the electrode.

Faced with these situations, we must make timely adjustments, otherwise it will easily cause cost waste and also affect product quality. Therefore, in the process of producing 75 ferrosilicon, in addition to controlling the quality and proportion of various raw materials In addition, you should also always pay attention to changes in the electric furnace.
​

Send Inquiry

Home

Phone

E-mail

Inquiry