Apr 11, 2024 Leave a message

Advantages of High Carbon Ferrosilicon

Daniel
Daniel
Daniel is responsible for ferro alloy products at Zhen An International, including ferro silicon, ferro vanadium, ferro manganese and silicon manganese, with a focus on specs, COA, packing and export quotation support.

What Is High Carbon Ferrosilicon?

High carbon ferrosilicon is a commercial silicon-carbon alloy containing substantially more carbon than conventional ferrosilicon, also described in the market as high carbon silicon or silicon-carbon alloy. Typical commercial grades are identified by their approximate minimum Si and C contents, such as Si68C18, Si65C15, and Si60C20. A product containing 15-20 percent carbon should not be treated as an ordinary FeSi75 or FeSi72 grade simply because both materials contain silicon; buyers should rely on the actual chemical specification rather than the product name alone.

Main Advantages

Combined silicon and carbon addition: One material contributes both Si and C, simplifying charge design when both elements are required. Deoxidation contribution: Silicon has a strong affinity for oxygen and participates in deoxidation reactions in molten steel. Carbon adjustment: The relatively high carbon content contributes to the melt carbon balance where additional carbon is acceptable or required. Fewer separate alloy inputs: In suitable processes, a Si-C alloy may reduce the need to handle separate silicon-alloy and carbon-bearing additions.

Grade Composition

Grade Si min (%) C min (%) Al max (%) S max (%) P max (%)
Si68C18 68 18 3 0.05 0.05
Si65C15 65 15 3 0.10 0.10
Si60C20 60 20 4 0.10 0.10

Grade Selection

Si68C18 provides the highest silicon contribution with carbon of at least 18 percent; Si65C15 offers a different Si/C balance when less carbon input is preferred; Si60C20 is more relevant where a larger carbon contribution can be accepted with a lower minimum silicon level. The theoretical element input is calculated as the alloy addition multiplied by the element fraction: for example, 100 kg of Si68C18 contains at least approximately 68 kg Si and 18 kg C before metallurgical recovery is considered. Actual recovery depends on furnace conditions, slag chemistry, addition method, and melt practice.

Applications and Standards

High carbon ferrosilicon is mainly considered where simultaneous silicon and carbon addition is acceptable: steelmaking deoxidation and alloy adjustment, carbon adjustment, and foundry and iron melting where both silicon and carbon must be adjusted. It should not be used as a direct substitute for conventional ferrosilicon when the melt has a tight carbon limit. GB/T 2272 applies to conventional ferrosilicon, while ASTM A100 also specifies ferrosilicon for steelmaking and foundry use; a high-carbon Si-C material with 15-20 percent carbon should be purchased according to the agreed chemical specification and certificate of analysis. Current supply-reference sizes include 0-5 mm, 3-10 mm, and 10-50 mm, with 1 MT big bags as the listed packing format.

Frequently Asked Questions

What is the main advantage of high carbon ferrosilicon? The simultaneous addition of silicon and carbon from one metallurgical material, useful when both elements are required in the melt.

Does high carbon ferrosilicon automatically improve steel strength? No. It supplies alloying elements, but final strength and hardness depend on the complete steel chemistry, microstructure, and processing conditions.

What sizes are available? Current supply-reference sizes include 0-5 mm, 3-10 mm, and 10-50 mm, with 1 MT big bags as the listed packing format.

What is the difference between Si68C18 and Si60C20? Si68C18 has a higher minimum silicon level of 68 percent with at least 18 percent carbon, while Si60C20 has a lower silicon minimum of 60 percent with at least 20 percent carbon.

Why should the chemical specification be checked? high-carbon Si-C material is not the same product as ordinary ferrosilicon, so acceptance should follow the agreed specification and certificate of analysis.

Send Inquiry

Home

Phone

E-mail

Inquiry