What Is High Carbon Ferrosilicon?
High carbon ferrosilicon is ferrosilicon with a larger carbon content. It is a new type of alloy used in converters: it can replace ferrosilicon, silicon carbide and carburizer in some applications, and reduce the amount of deoxidizer required. Because one material carries both silicon and carbon, the converter operator simplifies the alloy addition program and gains more control over the final chemistry of the heat.
Specifications and Particle Size
High carbon ferrosilicon is supplied in natural blocks, 10-100 mm particles, powder, or customized sizes according to customer requirements. Packaging is typically in ton bags (1000 kg per bag) or customized on request. The particle size should be matched to the charging system of the plant: lump sizes suit hopper and conveyor feeding, while powder is used where fine dosing or injection is preferred.
Typical Grades
| Grade | Si (min %) | C (min %) | Al (max %) | S (max %) | P (max %) |
|---|---|---|---|---|---|
| Si68C18 | 68 | 18 | 3 | 0.1 | 0.05 |
| Si65C15 | 65 | 15 | 3 | 0.1 | 0.05 |
| Si60C10 | 60 | 10 | 3 | 0.1 | 0.05 |
The grade is selected according to the silicon and carbon targets of the heat, with aluminum, sulfur, and phosphorus held to the limits shown above. Buyers should confirm the analysis certificate with each delivery so that the actual composition can be verified against the agreed grade.
Advantages in Steelmaking
Combines silicon deoxidation with carbon addition in one material
Can reduce or replace separate additions of ferrosilicon, silicon carbide and carburizer
Reduces the amount of deoxidizer required in converter operations
Simplifies alloy handling and improves cost efficiency
Because the material replaces several conventional inputs, it also reduces the number of storage bins and the complexity of the alloy feed system. The combined addition shortens the alloying step, which is an advantage in converter shops with tight tap-to-tap times.
Frequently Asked Questions
What is high carbon ferrosilicon? ferrosilicon grade with elevated carbon content, typically 10-18 percent carbon, used in converter steelmaking as a combined deoxidizer and carburizer.
What sizes are available? Natural blocks, 10-100 mm particles and powder, with ton-bag or customized packaging.
What can high carbon ferrosilicon replace? It can replace ferrosilicon, silicon carbide and carburizer in some converter applications, reducing deoxidizer consumption.
How is the grade selected? according to the silicon and carbon targets of the heat, with aluminum, sulfur, and phosphorus held within the grade limits.
What packaging is standard? Ton bags of 1000 kg per bag, or customized packaging on request.


