Jan 12, 2024 Leave a message

Charging System of High Carbon Ferromanganese in a Blast Furnace

Material Line

The material line is the distance from the lower edge of the bell to the material surface. Based on the characteristics of manganese ore with small particle size, high density, and poor rolling properties, and coke with large particle size and good rolling properties, the material line of a high carbon ferromanganese blast furnace is selected below the collision point. By rebounding the cloth, the ore is distributed to the edge and the coke to the center, which is conducive to the development of the central gas flow.

Batch Weight

Batch weight refers to the weight of each batch of ore. Small material batches produce heavier edges, and larger material batches produce wider edges. According to the smelting characteristics of the high carbon ferromanganese blast furnace, small batches of materials are generally used to weight the edges.

Loading Sequence

The loading sequence refers to the order in which ore, coke, and flux in a batch of materials are loaded into the hopper. Installing the ore first is called formal installation, which emphasizes the edge, and installing the coke first is called reverse installation, which develops the edge. There are also divided packaging, semi-formal packaging, and semi-reverse packaging methods.

Distributor Working System

The working system of the distributor is a measure to make the charge evenly distributed in the blast furnace section. It can also be used to correct the uneven decline of the charge and the rise of the gas. High carbon ferromanganese blast furnaces usually use a six-point distributor, meaning each batch of materials rotates 60 degrees.

Frequently Asked Questions

Why is the material line selected below the collision point? Because ore and coke roll differently, rebounding the cloth distributes ore to the edge and coke to the center, developing central gas flow.

What is formal installation? Loading the ore first, which emphasizes the edge of the furnace.

How does the six-point distributor work? Each batch of materials rotates 60 degrees so the charge is evenly distributed.

Why are small material batches used for high carbon ferromanganese? Small batches produce heavier edges, which matches the smelting characteristics of the high carbon ferromanganese blast furnace.

What is the purpose of the distributor working system? It makes the charge evenly distributed in the furnace section and corrects the uneven decline of the charge and the rise of the gas.

Send Inquiry

Home

Phone

E-mail

Inquiry