Jan 24, 2024 Leave a message

Common Metal Sputtering Target Materials and Their Uses

What a Sputtering Target Is

A sputtering target is a solid source material used in physical vapour deposition. In a vacuum chamber, energetic ions bombard the target and eject atoms, which deposit as a thin film on the substrate. The target therefore determines the composition and purity of the film. Metal targets are produced by melting, casting, rolling or powder metallurgy, and they are bonded to a backing plate for mounting in the sputtering system. Target quality, grain structure and purity directly affect film uniformity and defect levels.

Common Metal Target Materials

The most widely used metal targets include copper, aluminum, titanium, nickel, chromium, molybdenum, tungsten, tantalum, silver, gold and zirconium. Copper and aluminum are used for conductive layers and interconnect metallisation. Titanium and chromium serve as adhesion and barrier layers. Molybdenum and tungsten are chosen for their high melting point and thermal stability. Tantalum is used as a diffusion barrier, and silver and gold are used where very high conductivity or oxidation resistance is required. Each metal is selected for a specific electrical, optical or mechanical function.

Purity, Grain Structure and Density

Target purity is usually expressed in nines, such as 99.9 or 99.99 percent, and higher purity reduces film contamination. Grain size and crystallographic orientation influence the sputter rate and film uniformity, so manufacturers control grain structure through thermomechanical processing. Density matters especially for powder metallurgy targets, because residual porosity causes arcing and particle generation. Bonding quality between the target and the backing plate affects heat removal, and poor bonding can lead to target cracking. These parameters are usually specified in the purchase standard or a customer drawing.

Applications by Industry

Semiconductor manufacturing uses high purity metal targets for interconnect, barrier and seed layers. Flat panel display production uses targets for transparent conductive and reflective layers. Photovoltaic cells use metal and compound targets for electrodes and back contacts. Architectural and automotive glass is coated with metal and oxide films for solar control and low emissivity. Decorative and functional coatings on tools and components also rely on metal targets. The required film thickness and property determine which metal and which target specification is appropriate.

Selecting and Using Targets

Selection begins with the film function, then the required purity, then the target geometry and bonding method. Users should confirm that the target dimensions, thickness and backing plate match the sputtering system, and that the cooling and power rating are suitable. During use, target erosion should be monitored and the sputtering parameters kept within the recommended range to avoid arcing and particulate defects. Recycling and reclaiming spent targets is common for high value metals, which reduces material cost and waste.

Frequently Asked Questions

Q: What is a sputtering target used for?
It is the source material that is bombarded to deposit a thin film onto a substrate in physical vapour deposition.

Q: Which metals are common target materials?
Copper, aluminum, titanium, nickel, chromium, molybdenum, tungsten, tantalum, silver and gold are widely used.

Q: What purity is needed for a metal target?
Purity is usually 99.9 percent or higher, with semiconductor applications requiring the highest levels.

Q: Why does grain structure matter?
Grain size and orientation affect the sputter rate, film uniformity and defect generation.

Q: Why are targets bonded to a backing plate?
Bonding improves heat removal and mechanical support, preventing cracking at high power.

Send Inquiry

Home

Phone

E-mail

Inquiry