1. Appropriate Melting Performance
Simply using easily meltable chromite will cause premature slag appearance. If the melting speed is faster than the reduction speed, chromium will easily escape into the slag, making smelting more difficult. Ore types must therefore be matched so that melting and reduction rates are balanced.
2. Appropriate Lumpiness Matching
When fine ore is used alone, it will cause the sintering of the ore, which worsens the air permeability of the material surface and seriously damages the smelting atmosphere. Large lumpiness causes the alloy carbon content to be low. A suitable blend of lump sizes is therefore required.
3. Suitable MgO/Al2O3 Ratio
The MgO/Al2O3 ratio affects the conductivity and reduction performance of the slag. In actual production, if the MgO/Al2O3 ratio is low, enough coke layer thickness must be added to protect the bottom of the furnace from damage and to increase the residence time of unreduced ore cores.
4. Suitable Chromium-Iron Ratio
Generally speaking, smelting alloys with a chromium content greater than 50 percent requires the Cr2O3/FeO ratio of the comprehensive ore entering the furnace to be greater than 2.0; smelting alloys with a chromium content greater than 60 percent requires this ratio to be greater than 2.6.
Frequently Asked Questions
Why does chromite melting speed matter? If melting is faster than reduction, chromium is lost to the slag and smelting becomes difficult.
What happens if fine ore is used alone? Ore sintering worsens material-surface permeability and damages the smelting atmosphere.
What is the Cr2O3/FeO ratio requirement? bove 2.0 for alloys with more than 50 percent chromium, and above 2.6 for alloys with more than 60 percent chromium.
Why is lumpiness matching needed in the charge? Fine ore used alone causes sintering and poor material-surface permeability, while very large lumps lower the alloy carbon content; a suitable blend of lump sizes keeps the smelting atmosphere stable.
How does the MgO/Al2O3 ratio affect smelting? The ratio influences the conductivity and reduction performance of the slag; when it is low, a thicker coke layer must be added to protect the furnace bottom and increase the residence time of unreduced ore cores.


