The particle size of coke affects the smelting of ferrosilicon. When the particle size is too large, the resistance of the charge decreases and it is difficult for the electrode to penetrate deeply into the charge, resulting in low furnace temperature, small crucible, and abnormal melting. If the particle size is too small or there are too many powders, the loss on ignition will be large, which will easily make the furnace body sticky and affect the air permeability of the material surface.

Ferro Silicon Supplier
Therefore, coke particle size is a factor that must be controlled when smelting ferrosilicon. The particle size of coke used in large ferrosilicon electric furnaces is recommended to be less than 8 mm. The temperature of small ferrosilicon electric furnace is low. In order to increase the temperature, it is recommended to use the "smoldering" process in operation. Adding some coke powder can help the sintering of the material surface, allowing the electrode to be inserted deeper into the furnace material. Therefore, a small amount of coke powder can be used when smelting in a small-capacity ferrosilicon electric furnace.

ferro silicon 75 Supplier


