Coke is the main raw material for smelting ferrosilicon and is also the reducing agent for smelting ferrosilicon. Therefore, the fixed carbon content in coke is required to be as high as possible, greater than 84%, and the ash content of coke is required to be low.

ferro silicon lumps
When the ash content of coke is high, the amount of slag increases. Such coke is not suitable for smelting ferrosilicon, and since the ash of the coke contains about 60% alumina, the slag becomes sticky and difficult to remove. In addition, adding coke with high ash content into the furnace can easily cause sintering on the surface of the material and affect the air permeability. Therefore, the ash content of coke is required to be less than 13%.

ferro silicon alloy
Most of the carbon in coke exists in the form of fixed carbon, but a small amount of carbon also exists in the form of volatiles. When this part of the material volatilizes, the volatilization content of the coke is high and it is not suitable for smelting ferrosilicon. The volatile content of coke must be kept below 2%.


