Oct 10, 2023 Leave a message

Special High Alumina Bricks

Classification and Properties

High alumina bricks are usually divided into special, primary, secondary, and tertiary high alumina bricks. For special high alumina bricks, the special bauxite clinker density is greater than or equal to 3.00 g/cm3, refractoriness is 1790 deg C or above, load softening temperature is greater than or equal to 1550 deg C, and bulk density is 2.60 g/cm3. The material has good sinterability and less impurities.

Special high alumina bricks contain aluminum (Al2O3) above 80 percent. Its high-temperature crystalline phases are mullite and corundum; with the increase of Al2O3 content, corundum increases and the amount of mullite is reduced, which accordingly improves the high-temperature strength of the product.

Applications

Mainly used in electric furnace roofs, blast furnaces, hot blast furnaces, ladles, steel drums, iron cars, cement kilns, glass kilns, and other thermal kiln linings. Widely used in ironmaking, steelmaking, chemical, and cement industries.

Frequently Asked Questions

What is the alumina content of special high alumina brick? Above 80 percent.

What are the key property values? Refractoriness at least 1790 deg C, load softening temperature at least 1550 deg C, bulk density 2.60 g/cm3.

What are the high-temperature phases? Mullite and corundum; corundum increases with Al2O3 content, improving high-temperature strength.

Send Inquiry

Home

Phone

E-mail

Inquiry