The smelting processes of ferrovanadium mainly include carbothermic method, silicon thermal method and aluminothermic method.
The smelting of ferrovanadium mainly uses a reducing agent to reduce vanadium pentoxide. According to the different reducing agents used in smelting ferrovanadium, the smelting methods are different. Among them, carbothermic method, silicon thermal method and aluminothermic method are the three main smelting methods.
Carbothermic method: It is a method of using carbon as a reducing agent to reduce vanadium pentoxide in an electric furnace to obtain ferrovanadium. This method requires an external heat source because the reaction is very slow and incomplete when carbon reduces vanadium oxide.
Silicon thermal method: It uses silicon as a reducing agent and is also smelted in an electric furnace. The basic principle of silicon thermal method for smelting ferrovanadium is to use silicon to reduce vanadium oxide, and an external heat source is required to accelerate the reaction. The silicothermic method includes two stages: reduction and refining. During the reduction stage, the reducing agent and vanadium pentoxide are loaded into the electric furnace, and silicothermic reduction is carried out under high calcium oxide slag. During the refining stage, flake vanadium pentoxide and lime are added to remove excess silicon, aluminum and other impurities in the alloy liquid.
Aluminothermic method: aluminum is used as a reducing agent. This method does not require heating in an electric furnace, but only relies on its own reaction to release heat. However, there are also cases where the electric aluminothermic method is used for smelting in an electric furnace.
Ferrovanadium product pictures




