Apr 15, 2023 Leave a message

Advantages Of Graphite Electrodes

1. The increasing complexity of the mold geometry and the diversification of product applications lead to higher and higher requirements for the discharge accuracy of the spark machine. The advantage of graphite electrode is that it is easier to process, the removal rate of electric discharge machining is high, and the loss of graphite is small. Therefore, some group-based spark machine customers have given up copper electrodes and switched to graphite electrodes. In addition, some special-shaped electrodes cannot be made of copper, but graphite is easier to form, and copper electrodes are heavy, which is not suitable for processing large electrodes. These factors have caused some group-based spark machine customers to use graphite electrodes.
2. Graphite electrodes are easier to process, and the processing speed is significantly faster than copper electrodes. For example, graphite is processed by milling, its processing speed is 2 to 3 times faster than that of other metals and does not require additional manual processing, while copper electrodes require manual grinding. Likewise, if a high-speed graphite machining center is used to manufacture the electrodes, it will be faster and more efficient without dust problems. In these processes, choosing tools and graphite with suitable hardness can reduce the wear loss of tools and the damage of copper electrodes. If the milling time of graphite electrodes and copper electrodes is specifically compared, graphite electrodes are 67% faster than copper electrodes. In general, graphite electrodes are processed 58% faster than copper electrodes in electrical discharge machining. As a result, the processing time is greatly reduced, which also reduces the manufacturing cost.
3. Graphite electrodes are designed differently from traditional copper electrodes. Many mold factories usually have different allowances for rough machining and finishing of copper electrodes, while graphite electrodes use almost the same allowance, which reduces the number of CAD/CAM and machine processing, for this reason alone, It is enough to improve the accuracy of the mold cavity to a great extent.

Send Inquiry

Home

Phone

E-mail

Inquiry