Jan 16, 2024 Leave a message

Basic Principles Of Smelting High Carbon Ferrochrome

Nitrided Low Carbon Ferro Chrome Lump

 

Semi-closed reduction electric furnaces are the most widely used. This kind of electric furnace (especially medium and small ones) is easy to observe and adjust the furnace conditions. It can adapt to different raw material conditions and is conducive to changing the refining variety. Electric furnace hoods are mostly semi-enclosed hoods evolved from short hoods. Several furnace doors with adjustable opening and closing degrees are usually provided on the sides, so that they can be opened when feeding and pounding the furnace are required, and can be opened as required. Control the air inlet volume, adjust the furnace gas temperature, and achieve flue gas dust removal and even waste heat utilization. A closed reduction electric furnace is a closed electric furnace with a furnace cover. The gas generated in the furnace is led out through a conduit and can be recycled after purification. In order to facilitate operation and maintenance and ensure safe operation, several covered peepholes, inspection and explosion-proof holes are provided on the lid of the closed electric furnace. This type of electric furnace has high technical requirements for operation and control.

 

Ferro Chrome

Nitrided Ferro Chrome Lump

 

The fully enclosed reduction electric furnace smelting workshop mainly consists of a batching station, a main workshop and auxiliary facilities. The basic principle of smelting high-carbon ferrochromium by the electric furnace method is to use carbon to reduce the chromium and iron oxides in the chromium ore in the high-temperature area of arc heating, which is called the electric carbothermal method. Submerged arc reduction electric furnace is a type of electric furnace, which is used for reduction and smelting of ore and other materials in ferrochrome production. The point is that the arc is always buried in the charge during normal smelting. Smelting operation process: The electric furnace flux method is used to produce high-carbon ferrochrome using a continuous operation method.

 

Ferrochrome

Medium Carbon Ferro Chrome Lump

 

The raw materials are batched in the order of coke, silica, and chromium ore to facilitate uniform mixing. The open furnace adds materials around the electrode through the feeding trough, and the material surface is in the shape of a large cone. In a closed furnace, materials are directly added into the furnace through a feeding pipe. Whether it is an open furnace or a closed furnace, new materials should be replenished in time as the charge in the furnace sinks to maintain a certain material level. The main process of producing high-carbon ferrochrome by chemical reactions in the electric furnace is: the starting temperature of carbon reduction of chromium oxide to form Cr3C2 is 1385K, the starting temperature of the reaction of forming Cr7C3 is 1453K, and the starting temperature of the reaction of reducing chromium to chromium is 1520K, so in carbon When chromium ore is reduced, chromium carbides are obtained, not metallic chromium. Therefore, only high-carbon ferrochrome with higher carbon content can be obtained. Moreover, the carbon content in ferrochromium depends on the reaction temperature. It is easier to form carbides with a high carbon content than carbides with a low carbon content. In actual production, during the heating process of the charge, some chromium ore reacts with coke to form Cr3C2, and as the temperature of the charge increases, Cr3C2 is formed. Most of the chromium ore reacts with coke to form Cr7C3. As the temperature increases further, chromium trioxide plays a refining and decarburizing effect on the alloy.

The starting temperature of the iron oxide reduction reaction is lower than the starting temperature of the chromium trioxide reduction reaction. Therefore, the iron oxide in the chromium ore is fully reduced at a lower temperature, and is mutually soluble with chromium carbide to form composite carbides, which reduces the The melting point of the alloy. At the same time, since chromium and iron dissolve in each other, the reduction reaction proceeds more easily.

Send Inquiry

Home

Phone

E-mail

Inquiry