Oct 11, 2023 Leave a message

Causes Of Erosion Of Gasifier Refractory Bricks

 

  Gasifier with refractory bricks refractory surface needs to work at a high temperature of about 1300 degrees Celsius, but also need to be able to resist the erosion of the slag, long-term use of the inevitable loss of refractory bricks, refractory bricks are not cheap within a short period of time frequency replacement will increase the cost of manufacturers to find the causes of the refractory bricks erosion, targeted solutions to effectively improve the service life of the refractory bricks, the refractory bricks, the refractory bricks, the refractory bricks and the refractory bricks, the refractory bricks are not cheap.
ZhenAn  Causes Of Erosion Of Gasifier Refractory Bricks manufacturers

Refractory brick erosion cause analysis

According to the use of refractory bricks and the use of the environment and conditions of use, the causes of its corrosion were analyzed:

1, melting ash erosion phenomenon.

  In the gasifier, the slag produced by the combustion of coal slurry in a molten state moves down the wall of the furnace to flow, and its main components are zirconium oxide, alumina, alumina, alumina, alumina ash, alumina powder or salt. When the slag is in contact with the refractory bricks, low melting point compounds are produced between the slag and the refractory bricks, and such compounds change the composition of the bricks, so that the newly formed low melting point compounds are constantly flushed by the slag, so that the refractory bricks are constantly being melted and penetrated, and stripping gradually occurs. Losses are unavoidable during the production of refractory bricks, and once the contact flow of the slag in the refractory bricks occurs, the losses will increase.

ZhenAn  Causes Of Erosion Of Gasifier Refractory Bricks suppliers

2, the destruction of stress

  Ordinary production furnace temperature up to 1300 ℃ or more, and the role of the refractory brick itself is to play a role in fire retardant, a certain thickness of the brick in different parts of the different parts of the volume will produce different expansion, while the outer wall of the gasifier will also impede this expansion. Refractory bricks composed of different substances have different expansion coefficients, and the thermal stresses generated within the bricks are also different. The interaction of various forces causes the loss of refractory bricks.
ZhenAn  Causes Of Erosion Of Gasifier Refractory Bricks factory

3, the impact of changes in working conditions

  Slag will change with the different types of coal, the refractory corrosion conditions will also change, this change will make the refractory corrosion conditions deteriorate. Furnace temperature changes with the conditions, changes in temperature will cause changes in stress, furnace temperature, furnace pressure fluctuations, gasifier on and off, will exacerbate the wear and tear of refractory bricks.

ZhenAn  Causes Of Erosion Of Gasifier Refractory Bricks made in China

4, refractory bricks and maintenance

  The quality of the furnace is closely related to the service life of the refractory bricks, the verticality and flatness of the brick surface directly affects the degree of erosion of the slag; ash binder, if it is not complete enough on the ash binder, or contains pores, will exacerbate the corrosion of the ash binder on the ash binder. After the completion of the new brick masonry, if the maintenance time is insufficient, or not in accordance with the baking time curve of the new brick oven baking, will cause damage to the brick.

ZhenAn  Causes Of Erosion Of Gasifier Refractory Bricks in stock 
5. the impact of the burner on the quality of burnt bricks.

  It mainly refers to the atomization effect of the burner, the bias spray of the burner, and the impact of the shape of the flame emitted from the burner on the refractory bricks. Furnace operation if the phenomenon of bias spray, will make the flame biased in the local furnace wall, resulting in local temperature is too high, localized violent scouring, burner spray flame is too long, easy to the bottom of the furnace brick caused by erosion, the flame is too short, it will make the vault brick to aggravate the erosion.

ZhenAn  Causes Of Erosion Of Gasifier Refractory Bricks price

 

 

If you are interested refractory products, contact us now!

Email: info@zaferroalloy.com Whatsapp: 8615896822096

Send Inquiry

Home

Phone

E-mail

Inquiry