Apr 20, 2023 Leave a message

Classification Of Monolithic Refractories

According to construction methods and material properties, monolithic refractory materials can be divided into pouring materials, plastic materials, ramming materials, gunning materials, dry mixtures, projection materials and coatings.
1. Pouring material
A material with good fluidity after mixing with water. After forming, it needs proper maintenance to make it condense and harden, and it can be used after being baked according to a certain system. The pouring material uses aluminum silicate clinker, corundum material or alkaline refractory clinker as the aggregate; the lightweight pouring material uses expanded perlite, vermiculite, ceramsite, and alumina hollow balls as the aggregate. The binder is calcium aluminate cement, water glass, ethyl silicate, polyaluminum chloride, clay or phosphate, etc. The admixture depends on the use situation, and its function is to improve the construction performance and improve the physical and chemical properties.
The construction and molding methods of pouring materials include vibration method, pump injection method, pressure injection method, spray method, etc. Use castables as integral linings, often in conjunction with metal or ceramic anchors. If it is reinforced with stainless steel fibers, its ability to resist mechanical vibration and thermal shock can be improved. The pouring material is used as the lining of various heat treatment furnaces, ore roasting furnaces, catalytic cracking furnaces, reforming furnaces, etc., and also used as the lining of smelting furnaces and high-temperature melt launders, such as lead-zinc melting furnaces, tin baths, and salt baths Furnaces, tapping or tapping troughs, ladles, suction nozzles for molten steel vacuum circulation degassing devices, etc.
2. Plastic
Plastic clay or clay. When an appropriate external force is applied, it is easy to deform without cracking; after the stress is removed, it will no longer deform. Plastic materials include semi-silicon, clay, high alumina, zircon, carbon, etc., and there are also lightweight plastics. Plastics must be added with plasticized materials, most of which are high plasticity clay, and plasticizers can also be used to improve the plasticity of this clay. Plasticizers include carboxymethyl cellulose, dextrin, lignosulfonate and the like. The binders used in plastics include plastic clay, phosphoric acid, aluminum dihydrogen phosphate, aluminum sulfate, etc. Alumina with phosphoric acid or phosphate binder can be plasticized. During storage, it will chemically react with alumina to form insoluble aluminum orthophosphate and harden the mud. Therefore, preservatives such as oxalic acid, citric acid, and acetyl Acetone etc.
The construction method generally adopts the ramming method or the vibration method. When the integral furnace lining is built with plastic, metal or ceramic anchors must be configured. The plastic can be used as the lining of thermal equipment such as soaking furnaces, heating furnaces, boilers, etc., and it can also be used to wrap the water-cooled pipes of heating furnaces.
3. Gunning material
A refractory mixture used for gunning or spraying with a jet machine. According to the gunning method, it can be divided into wet gunning (or mud gunning), semi-dry gunning and fire (flame) gunning. Wet gunning uses compressed air to spray mud containing 20-40% refractory powder, which can achieve higher mist dispersion, high adhesion rate, and more uniform thin-layer gunning. The semi-dry gunning method is to add water to the nozzle to moisten the refractory powder sprayed by compressed air. The amount of water added is 11-14%, the adhesion rate is low, and thicker layers of gunning can be carried out. Fire gunning belongs to dry gunning, and the gunning material is sent to the flame of the fuel-oxygen spray gun, and the gunning material is partially melted in the nozzle flame and attached to the brick lining.
Gunning materials are made of aluminum silicon, aluminum silicon zirconium, magnesium, magnesium calcium, magnesium chromium, etc. The binders used are sodium silicate, phosphate, polyphosphate, asphalt, resin and so on. In order to improve the adhesion rate, clay, bentonite, lime and other additives are added. In order to ensure that the gunning material can achieve good sintering, sintering aids such as serpentine, pure olivine, lime, refractory clay, iron oxide, etc. are also added.
4. Refractory coating
Material applied to refractory brick linings. According to different requirements and construction methods, refractory coatings can be formulated into mud paste and mud. The binder used varies depending on the material, such as alkaline coating phosphate, polyphosphate, magnesium sulfate for the preparation of continuous casting tundish; clay, aluminum dihydrogen phosphate, aluminum chromium phosphate, water glass, etc. . In order to improve the applicability of the paint, it is generally necessary to add admixtures such as plasticizers. Coatings are mainly used as protective coatings for linings of various thermal equipment, or for repairing local damage to brick linings.
5. Ramming material
A bulk refractory material with very low or no plasticity. The materials are silicon, clay, high alumina, corundum, zircon, silicon carbide, carbon, magnesium, etc. According to the material of the ramming material and the conditions of use, an inorganic or organic binder similar to that of the pouring material can be used, such as water-soluble dextrin, carboxymethyl cellulose, lignin, sulfonate, polyvinyl alcohol; water-resistant and Thermoplastic paraffin, asphalt, tar, phenolic resin, atactic polypropylene, etc.
The ramming material is constructed by forced ramming, with low porosity and high density. Therefore, among the unshaped refractory materials, the ramming material is especially suitable for lining of melting furnaces and various containers containing high-temperature molten metal. Such as open hearth furnace and electric furnace hearth, various induction furnace linings, blast furnace tapping channels, steel drums, etc.
6. Projection material
A kind of semi-dry mud that is projected by a projector for lining. It is mainly used to build the inner lining of the whole steel drum. Materials include silicon, wax stone, clay, high alumina and zircon. High-silicon and high-alumina projection materials are mostly used.
7. Dry mix
Dry mix, also known as dry vibration material or dry material. A monolithic refractory material that is constructed in a dry state by vibrating or ramming. Most of these materials contain some kind of temporary binder, which will be released from the mold after baking.

Send Inquiry

Home

Phone

E-mail

Inquiry